USB Boost Module 5V to 0.5 to 30V (10W)📲✔🙊
Link:
USB: https://www.banggood.in/custlink/GGGGNQWPjv
Decoy: https://amzn.to/353SwBP
https://www.banggood.in/custlink/mvvmn5wf5z
Geekcreit® USB Boost Module 5V to 9V12V Step Up Module Adjustable Voltage Current Display Charging Router Converter - with housing
Parameters:
1. Input voltage: 4-13 V (when using the pad input, pay attention to the positive and negative poles, DO NOT connect the AC power)
2. Output voltage: 0.5-30 V
3. Output current: 0-2 a (the output current in constant voltage mode depending on the size of the load is adaptable, it is not adjustable.) If you set the limit current to 1 A, then the load current is greater than 1 A, the constant current mode 1A will be entered automatically)
4. Output power: less than 15 W (when the output power is greater than 15 W, the output is automatically turned off and the operation is displayed). After reducing the load power, press the on/off button to fix it). When the input current is too large, it can be turned off early due to temperature protection.
5. Voltage display: Resolution 0.1 V, factory accuracy ± 0.1 V plus or minus (can be corrected manually after comparing with the standard voltmeter)
6. Current screen: Resolution 0.01A, range 0-2.2A, factory accuracy ± 0. 05A; the display error is greater when the output current is less than A, a small current cannot be displayed within 10-40 mA (it can be corrected manually, the calibration of the output current is more accurate when it is greater than 1 A, and calibration is not recommended for small currents.)
7. Power display: 0.00W-15.0W
8. Temperature protection: when the temperature of the power component is higher than 100 ° C, enter the OT protection, reduce the load power, press the on / off button to solve it (the power will not introduce the OT protection for an operation to long term in 10 W, when the input current is greater than 3A, You can introduce protection against overtemperature when it works for a long time, even if it does not rea ch 15 W)
9. Operating current: approximately 30 mA
10. Charging anti-backflow: Yes, it can be directly connected to the battery for charging, no need to add a diode
11. Short circuit protection: Yes, it can be directly connected to the battery for charging, no need to add a diode
12. Weight: 30g with outer casing, without housing 20g
##usbpower #variablepowersupply #trending #bcdtechnology #bcdtech
******************************************************************
My recording Gears:
Camera: 🎥Sony alpha a6300
Mic: 🎙 Rode Video Mic Pro Plus /🎙Zoom H5 Recorder with SSH-6 capsule
Editing: Vegas Pro
Laptop: 💻 GS43VR 7RE MSI
******************************************************************
For Business Inquiry contact bcdtechnology@gmail.com or bcdtech0@gmail.com
******************************************************************
Follow me on:
http://www.bcdtech.in
https://twitter.com/BCD_Tech
https://www.facebook.com/bcdtech.in
(c) 2019, BCD Tech, rights reserved.
******************************************************************
Видео USB Boost Module 5V to 0.5 to 30V (10W)📲✔🙊 канала BCD Technology
USB: https://www.banggood.in/custlink/GGGGNQWPjv
Decoy: https://amzn.to/353SwBP
https://www.banggood.in/custlink/mvvmn5wf5z
Geekcreit® USB Boost Module 5V to 9V12V Step Up Module Adjustable Voltage Current Display Charging Router Converter - with housing
Parameters:
1. Input voltage: 4-13 V (when using the pad input, pay attention to the positive and negative poles, DO NOT connect the AC power)
2. Output voltage: 0.5-30 V
3. Output current: 0-2 a (the output current in constant voltage mode depending on the size of the load is adaptable, it is not adjustable.) If you set the limit current to 1 A, then the load current is greater than 1 A, the constant current mode 1A will be entered automatically)
4. Output power: less than 15 W (when the output power is greater than 15 W, the output is automatically turned off and the operation is displayed). After reducing the load power, press the on/off button to fix it). When the input current is too large, it can be turned off early due to temperature protection.
5. Voltage display: Resolution 0.1 V, factory accuracy ± 0.1 V plus or minus (can be corrected manually after comparing with the standard voltmeter)
6. Current screen: Resolution 0.01A, range 0-2.2A, factory accuracy ± 0. 05A; the display error is greater when the output current is less than A, a small current cannot be displayed within 10-40 mA (it can be corrected manually, the calibration of the output current is more accurate when it is greater than 1 A, and calibration is not recommended for small currents.)
7. Power display: 0.00W-15.0W
8. Temperature protection: when the temperature of the power component is higher than 100 ° C, enter the OT protection, reduce the load power, press the on / off button to solve it (the power will not introduce the OT protection for an operation to long term in 10 W, when the input current is greater than 3A, You can introduce protection against overtemperature when it works for a long time, even if it does not rea ch 15 W)
9. Operating current: approximately 30 mA
10. Charging anti-backflow: Yes, it can be directly connected to the battery for charging, no need to add a diode
11. Short circuit protection: Yes, it can be directly connected to the battery for charging, no need to add a diode
12. Weight: 30g with outer casing, without housing 20g
##usbpower #variablepowersupply #trending #bcdtechnology #bcdtech
******************************************************************
My recording Gears:
Camera: 🎥Sony alpha a6300
Mic: 🎙 Rode Video Mic Pro Plus /🎙Zoom H5 Recorder with SSH-6 capsule
Editing: Vegas Pro
Laptop: 💻 GS43VR 7RE MSI
******************************************************************
For Business Inquiry contact bcdtechnology@gmail.com or bcdtech0@gmail.com
******************************************************************
Follow me on:
http://www.bcdtech.in
https://twitter.com/BCD_Tech
https://www.facebook.com/bcdtech.in
(c) 2019, BCD Tech, rights reserved.
******************************************************************
Видео USB Boost Module 5V to 0.5 to 30V (10W)📲✔🙊 канала BCD Technology
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Stuffcool Flow25: || PPS, PD3.0, Apple, QC4+, || Type-C & USB-A Charger📲✔🖊Tutorial: How to Operate Multimeters 📟💥✔ Full Review Deep Bass TWS: Boult Audio X30 Gaming Earbuds ❤🤒सेहतमंद खाने के लिए Smart Air Fryer || Low Oil and Fat Cooking || 🚑RAEGR RapidLink 1160, 65W GaN Fast Charger Adapter PD3.0 & QC4 📲💥❤ BEST USB #Microphone: #FIFINE T730 🛠Stuffcool Nova PD65W: || PD, PPS, SFC, AFC, QC4+, SCP || Type-c & 1 USB-A GaN Charger📲✔URBN Power 20,000 mAh: TearDown, Charging Time & Capacity Tests 🛠❤Value for Money & Better than Rode || #MAONO #AU_PM461|| Unboxing & Review ❤✔How Earthing Works ?#Mi_Powerbank Boost Pro 30,000 mAh: #Teardown, #Charging_Test (5V/9V) and #Capacity_Test 🛠✔Stuffcool Neutron 33: PD3.0 33W, PPS 33W, QC4+, SFC, AFC Charger 🛠📲💥15 Watts Wireless Power bank || Stuffcool PB9036W || 🛠📲🛠 Mi Power Bank Hypersonic: Teardown, Charging, Capacity, and Temperature Testing❤ ✔Redmi Note 5 Pro & Oneplus 5T Pixels ||| LCD vs AMOLED |||Xpods Pro – Boult Audio 🛠✔OK Tested ! Mi Pocket Power Bank Pro 10,000 mAh 🛠💔💥🙈#6580mAh Realme #30Watt #DART Power Bank #Capacity, #Charging Time Testing & #Teardown 🛠💥🙈RD DP30V5A-L Constant Voltage/Current Programmable Buck Power SupplyTested 2 In 1 Plastic Safe #SMD_ReWork Station: Bakon BK881🛠✔🔌🔌 Halonix #Smart #Plug (WiFi): Energy #Monitoring ❤