Introducing the Maksiwa EDGE BANDER & TRIMMER
Direct link to product:
https://www.richelieu.com/qr/MAK03023 (USA)
https://www.richelieu.com/qr/MAK03024 (CAN)
The Portable Edgebander is designed for convenience, portability and affordability. It features a hot melt glue applicator for use on PVC, ABS, paper and wood veneer edgebanding that is not pre-glued.
Maximum edgebanding thickness of 3 mm and width of up to 3".
Features digital temperature control (adjustable from 120° to 220°C) and an electronic speed regulator.
The required glue works in the range of 150°C to 180°C.
The glue pot has a capacity of 1.5 lb, comes with 1.5 lb of glue and heats in 15 minutes.
Technical information:
Tape thickness: 0.3 mm to 2 mm (1/64" to 5/16")
Max. tape width: 3"
Feeder speed: 18 ft/min
Power: 1.300 Watts
Motor: 1 Phase
Volts/amps: 127 V - 5,9 A | 220 V - 10,2 A
ADVANTAGES AND BENEFITS
- Easy and fast setup
- Precise cutting of the tape with its integrated manual cutter
- Tape support for the tape roll
- Inner guide to help align the workpiece before the glue spindle
- Tape guide to ensure the alignment of the tape and the workpiece
- Rubber spindle guides the tape onto the workpiece at a set speed
- Back rolls provide pressure points that help the bonding of the glue and the edgebanding tape
- Table guide to help move the workpiece easily over the table
- Retractable legs make it portable
- Can fit in a standard car trunk for easy transportation
***
Direct link to product: https://www.richelieu.com/qr/MAK238396
The Edge Trimmer Machine trims and scrapes edgebanding applied to MDF and similar substrate material, providing a perfect finish.
Suitable for ABS edges, PVC and others.
Comes with a versatile mounting system that adapts to any kind of bench.
ADVANTAGES AND BENEFITS
- Portable
- Easy to install and operate
- Helps you ensure perfect finishing in your projects
IMPORTANT INFORMATION
Technical information:
Max. workpiece height: 2 3/8"
Table length: 39"
Table width: 6" to 16"
Trimmer speed: 32,000 RPM
Power: 500 W
Volts/amps: 127 V - 4.3 A | 220 V - 2.5 A
https://www.richelieu.com
Видео Introducing the Maksiwa EDGE BANDER & TRIMMER канала Richelieu Hardware - HQ
https://www.richelieu.com/qr/MAK03023 (USA)
https://www.richelieu.com/qr/MAK03024 (CAN)
The Portable Edgebander is designed for convenience, portability and affordability. It features a hot melt glue applicator for use on PVC, ABS, paper and wood veneer edgebanding that is not pre-glued.
Maximum edgebanding thickness of 3 mm and width of up to 3".
Features digital temperature control (adjustable from 120° to 220°C) and an electronic speed regulator.
The required glue works in the range of 150°C to 180°C.
The glue pot has a capacity of 1.5 lb, comes with 1.5 lb of glue and heats in 15 minutes.
Technical information:
Tape thickness: 0.3 mm to 2 mm (1/64" to 5/16")
Max. tape width: 3"
Feeder speed: 18 ft/min
Power: 1.300 Watts
Motor: 1 Phase
Volts/amps: 127 V - 5,9 A | 220 V - 10,2 A
ADVANTAGES AND BENEFITS
- Easy and fast setup
- Precise cutting of the tape with its integrated manual cutter
- Tape support for the tape roll
- Inner guide to help align the workpiece before the glue spindle
- Tape guide to ensure the alignment of the tape and the workpiece
- Rubber spindle guides the tape onto the workpiece at a set speed
- Back rolls provide pressure points that help the bonding of the glue and the edgebanding tape
- Table guide to help move the workpiece easily over the table
- Retractable legs make it portable
- Can fit in a standard car trunk for easy transportation
***
Direct link to product: https://www.richelieu.com/qr/MAK238396
The Edge Trimmer Machine trims and scrapes edgebanding applied to MDF and similar substrate material, providing a perfect finish.
Suitable for ABS edges, PVC and others.
Comes with a versatile mounting system that adapts to any kind of bench.
ADVANTAGES AND BENEFITS
- Portable
- Easy to install and operate
- Helps you ensure perfect finishing in your projects
IMPORTANT INFORMATION
Technical information:
Max. workpiece height: 2 3/8"
Table length: 39"
Table width: 6" to 16"
Trimmer speed: 32,000 RPM
Power: 500 W
Volts/amps: 127 V - 4.3 A | 220 V - 2.5 A
https://www.richelieu.com
Видео Introducing the Maksiwa EDGE BANDER & TRIMMER канала Richelieu Hardware - HQ
Показать
Комментарии отсутствуют
Информация о видео
19 октября 2018 г. 21:01:31
00:01:50
Другие видео канала
Introducing a new affordable way to make finger pull doors by hand...Gabarito para Tupia Makita RT0700 / Micro-Ajuste.OptiSaw 3.2 (Auto) - Automatic Panel SawMY05 edge banding machine operation vedioКромкооблицовочный станок с фрезеровкой «универсальный» СтанкоChelRefiladora de Borda de Bancada 32.000 RPM 500 W RBB.1000 MAKSIWA - Loja do MecânicoThe Cabinet Manufacturing Process - CabjaksUsing the Maksiwa Edge Bander and Edge TrimmerEdgebanding Machine FinalHTM - 1500 (New Version)Setup demonstration of the Edgebander G330 from Felder® | Felder Groupedge banderHOW TO SETUP EDGE TRIMMER RBB.1000PEB250 Virutex glue pot edge banderMY06B multi edge banding machine with gluing,trimming and end cuttingEDGE BANDING THE QUICK & EASY WAYEdge Banding PlywoodColadeira de borda com cola quente feita em casaYUCHENGTECH Edge Banding Machine