Making a commemorative ax
Buy a mug: https://www.facebook.com/valeriy.teslya
Making an exclusive ax. Drawing on an ax by electrochemical etching. Ax of 1989 release. The ax is a gift in honor of the SaddleSore 1000 standard. The route of the motorcycle trip passed through the territory of Ukraine. In honor of this trip, a hiking commemorative ax was made, which the person will use in his future travels.
Everything shown in the video is not a role model.
00:25 - Grinding the ax.
01:35 - I paint the ax with an aerosol alkyd primer (paint). The paint protects the metal from etching.
02:07 - Film (lavsan tracing paper) with a picture. The drawing was made with a simple pencil, on the matte surface of the film.
02:42 - I apply the film to the ax, pattern down. Pressing on the back of the film with a pencil, I reprint the drawing on the ax.
03:31 - With a sharp metal needle with a pen, I clean off the paint in the places where the metal should be corroded.
04:13 - I add water and salt to the brine. I stir it. The solution is dark in color because it has been used before. This solution is reusable.
04:36 - I glue all the corners of the ax. In these places, the layer of paint is the thinnest, and it must be additionally protected. I use a paper medical plaster.
05:07 - Copper plate.
05:43 - I put the current regulator at 20 amperes.
05:52 - Etching of the metal takes place in a water-salt solution for 15 minutes. Time to drink coffee. Buy a mug: https://www.facebook.com/valeriy.teslya
07:50 - I wash the ax with clean water.
08:17 - Partially peeling off the paint from the ax.
08:43 - Etching the background of the picture. Etching takes place with a 25 volt device. I do this so that the background of the picture is different.
09:24 - My ax is in the water.
09:33 - I remove paint residues from the ax. I use a solvent.
09:52 - Special liquid for cold blackening of metal. The black color will fill in all the indentations on the surface of the metal, and the pattern will look contrasting.
10:04 - I sand the metal surface with P800 sandpaper.
10:19 - Grinding the handle with P100 sandpaper.
10:29 - Special alcohol-based wood dye. I paint the handle.
10:56 - Smearing wood with impregnation. The impregnation contains linseed oil. This will protect the wood from moisture.
11:24 - I lubricate the metal with machine oil. This will protect the metal from oxidation.
Tools and materials that can be useful for this kind of work:
- angle grinder
https://www.amazon.com/gp/product/B00RVZ7DNO/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00RVZ7DNO&linkCode=as2&tag=kirillrunz-20&linkId=138d6f63624090d5098c53ff17291f01
- Benchtop Band Saw
https://www.amazon.com/gp/product/B077QMBTLP/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B077QMBTLP&linkCode=as2&tag=kirillrunz-20&linkId=f8f42f02dbe9e5d45c118953448c9dfa
- inverter welding machine
https://www.amazon.com/gp/product/B08D67XG46/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B08D67XG46&linkCode=as2&tag=kirillrunz-20&linkId=c7fde6db45e8b3d1a1232d339e02b0d8
- Benchtop Drill Press
https://www.amazon.com/gp/product/B08J43G8QV/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B08J43G8QV&linkCode=as2&tag=kirillrunz-20&linkId=04ca4789e284edd0ad0d377996489907
- Electronic Fixed-Base Router
https://www.amazon.com/gp/product/B08DY55SLL/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B08DY55SLL&linkCode=as2&tag=kirillrunz-20&linkId=8225c0f1b287299f33aab143180a9ae3
- Variable Speed Bench Grinder
https://www.amazon.com/gp/product/B01M9FVT0W/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B01M9FVT0W&linkCode=as2&tag=kirillrunz-20&linkId=e80ffbe30517c63f52b1ba381f2b531e
- Bench Belt and Disc Sander
https://www.amazon.com/gp/product/B003J69ET0/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B003J69ET0&linkCode=as2&tag=kirillrunz-20&linkId=9ca540eb8afc3a6f362944c4ccffb7d3
- Jig Saw
https://www.amazon.com/gp/product/B004X1PB3I/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B004X1PB3I&linkCode=as2&tag=kirillrunz-20&linkId=48138481f61bd06a18aef9874f5aab16
- Engraver
https://www.amazon.com/gp/product/B002L3RUW0/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B002L3RUW0&linkCode=as2&tag=kirillrunz-20&linkId=5d2685f5b478aefbccc2e1234d97ca32
- Reusable Half Face Cover with Safety Glasses
https://www.amazon.com/gp/product/B087CZSH64/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B087CZSH64&linkCode=as2&tag=kirillrunz-20&linkId=edbf0888737b568116d5e8d8cfb2ff8f
- Mechanical Pencil 0.5mm
https://www.amazon.com/gp/product/B089QC2C8G/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B089QC2C8G&linkCode=as2&tag=kirillrunz-20&linkId=eb2b48a77b7703aec8d82e36a54cc88d
- Carbon Copy Paper, Transfer Paper
https://www.amazon.com/gp/product/B07KRKM8M4/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B07KRKM8M4&linkCode=as2&tag=kirillrunz-20&linkId=a0a9276b78bacbe5066d411128f5e8f9
Видео Making a commemorative ax канала Kirill Runz
Making an exclusive ax. Drawing on an ax by electrochemical etching. Ax of 1989 release. The ax is a gift in honor of the SaddleSore 1000 standard. The route of the motorcycle trip passed through the territory of Ukraine. In honor of this trip, a hiking commemorative ax was made, which the person will use in his future travels.
Everything shown in the video is not a role model.
00:25 - Grinding the ax.
01:35 - I paint the ax with an aerosol alkyd primer (paint). The paint protects the metal from etching.
02:07 - Film (lavsan tracing paper) with a picture. The drawing was made with a simple pencil, on the matte surface of the film.
02:42 - I apply the film to the ax, pattern down. Pressing on the back of the film with a pencil, I reprint the drawing on the ax.
03:31 - With a sharp metal needle with a pen, I clean off the paint in the places where the metal should be corroded.
04:13 - I add water and salt to the brine. I stir it. The solution is dark in color because it has been used before. This solution is reusable.
04:36 - I glue all the corners of the ax. In these places, the layer of paint is the thinnest, and it must be additionally protected. I use a paper medical plaster.
05:07 - Copper plate.
05:43 - I put the current regulator at 20 amperes.
05:52 - Etching of the metal takes place in a water-salt solution for 15 minutes. Time to drink coffee. Buy a mug: https://www.facebook.com/valeriy.teslya
07:50 - I wash the ax with clean water.
08:17 - Partially peeling off the paint from the ax.
08:43 - Etching the background of the picture. Etching takes place with a 25 volt device. I do this so that the background of the picture is different.
09:24 - My ax is in the water.
09:33 - I remove paint residues from the ax. I use a solvent.
09:52 - Special liquid for cold blackening of metal. The black color will fill in all the indentations on the surface of the metal, and the pattern will look contrasting.
10:04 - I sand the metal surface with P800 sandpaper.
10:19 - Grinding the handle with P100 sandpaper.
10:29 - Special alcohol-based wood dye. I paint the handle.
10:56 - Smearing wood with impregnation. The impregnation contains linseed oil. This will protect the wood from moisture.
11:24 - I lubricate the metal with machine oil. This will protect the metal from oxidation.
Tools and materials that can be useful for this kind of work:
- angle grinder
https://www.amazon.com/gp/product/B00RVZ7DNO/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00RVZ7DNO&linkCode=as2&tag=kirillrunz-20&linkId=138d6f63624090d5098c53ff17291f01
- Benchtop Band Saw
https://www.amazon.com/gp/product/B077QMBTLP/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B077QMBTLP&linkCode=as2&tag=kirillrunz-20&linkId=f8f42f02dbe9e5d45c118953448c9dfa
- inverter welding machine
https://www.amazon.com/gp/product/B08D67XG46/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B08D67XG46&linkCode=as2&tag=kirillrunz-20&linkId=c7fde6db45e8b3d1a1232d339e02b0d8
- Benchtop Drill Press
https://www.amazon.com/gp/product/B08J43G8QV/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B08J43G8QV&linkCode=as2&tag=kirillrunz-20&linkId=04ca4789e284edd0ad0d377996489907
- Electronic Fixed-Base Router
https://www.amazon.com/gp/product/B08DY55SLL/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B08DY55SLL&linkCode=as2&tag=kirillrunz-20&linkId=8225c0f1b287299f33aab143180a9ae3
- Variable Speed Bench Grinder
https://www.amazon.com/gp/product/B01M9FVT0W/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B01M9FVT0W&linkCode=as2&tag=kirillrunz-20&linkId=e80ffbe30517c63f52b1ba381f2b531e
- Bench Belt and Disc Sander
https://www.amazon.com/gp/product/B003J69ET0/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B003J69ET0&linkCode=as2&tag=kirillrunz-20&linkId=9ca540eb8afc3a6f362944c4ccffb7d3
- Jig Saw
https://www.amazon.com/gp/product/B004X1PB3I/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B004X1PB3I&linkCode=as2&tag=kirillrunz-20&linkId=48138481f61bd06a18aef9874f5aab16
- Engraver
https://www.amazon.com/gp/product/B002L3RUW0/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B002L3RUW0&linkCode=as2&tag=kirillrunz-20&linkId=5d2685f5b478aefbccc2e1234d97ca32
- Reusable Half Face Cover with Safety Glasses
https://www.amazon.com/gp/product/B087CZSH64/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B087CZSH64&linkCode=as2&tag=kirillrunz-20&linkId=edbf0888737b568116d5e8d8cfb2ff8f
- Mechanical Pencil 0.5mm
https://www.amazon.com/gp/product/B089QC2C8G/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B089QC2C8G&linkCode=as2&tag=kirillrunz-20&linkId=eb2b48a77b7703aec8d82e36a54cc88d
- Carbon Copy Paper, Transfer Paper
https://www.amazon.com/gp/product/B07KRKM8M4/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B07KRKM8M4&linkCode=as2&tag=kirillrunz-20&linkId=a0a9276b78bacbe5066d411128f5e8f9
Видео Making a commemorative ax канала Kirill Runz
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Pirography Viking. Stand for the ax.Viktor Tsoi. portrait on guitar. PyrographyDrawing on metal. Pirates of the Caribbean. knife makingHobby or business. You can do this in your garageDrawing on metal. Viking Belt LocketDrawing on metal. Ax from a construction pickaxe. Drawing on metalDIY Metal Etching Tutorial: Personalize Your Metal Items!Making a collectible axe. Art etchingMaking a knife from the old stuffDrawing on metal. How to draw on metal step by step. Restoration of an old axMaking jaw harp from scrap materialsDrawing on metal. How to make a vintage ax.SIMPLE tech. Real price. Detailed analysis of the process and costDrawing on metal. Making Witcher ax in his garageDrawing on metal. Pirate compass for finding treasure. How to draw on metalMaking jaw harp.Drawing on metal. Restoration knife. How to make a Viking knifeMaking a Carved Handle for a Japanese ChiselMotorcycle decoration with a pattern.Drawing on metal. Knife Making.