DIY UV LED Resin Curing Bucket

I needed a quick and cheep way to cure resin prints. So I built this very simple, down and dirty UV LED Curing “Bucket.” It’s not pretty, but it is very simple and easy to make- and most importantly, it is CHEAP!!l

Note that when I filmed this I was using this bucket to cure prints from the Peopoly Moai, which could take much longer to cure. Curing prints from typical mSLA printers would be much faster than the times I suggest in the video.

**************************************************************************************************
Most of the parts I've used in this video are available on Amazon. I've provided affiliate links below for you convieniece.

These are the UV 12V LED’s that I used for this project. They are in the right UV spectrum to cure prints with most resin’s that can be used on the Moai and many other SLA printers.
https://amzn.to/2XuuOih

Here's a link to the power supply for the UV LED's:
http://amzn.to/2DptvDK

If you'd like to grab the aluminum tape online, you can grab that here:
http://amzn.to/2rrL1G6

And you can find the metal pail I used here:
http://amzn.to/2Dnd9vA

**************************************************************************************************

If you like the channel, please be sure to subscribe and leave a thumbs up!

If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! As an Amazon Associate I earn from qualifying purchases through these links.
https://www.amazon.com/shop/crussty
Or
Amazon US: http://amzn.to/2gQC6Wg
Amazon UK: https://amzn.to/2RCmnv9

Wanna save some loot on your purchases over at FilamentOne? Use this link and code to save yourself 5% off every order, and help support the channel at the same time!
http://www.filamentone.com/discount/P...
Use code 'PracticalPrinting' at checkout.

**************************************************************************************************

Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: https://www.patreon.com/pp3d

Channel Intro music by Joseph Cervantes. You can find more of his great music here:
https://soundcloud.com/joseph-george-...
Instagram:airbum92

Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-...

I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
https://www.facebook.com/Practical3D/

Видео DIY UV LED Resin Curing Bucket канала Practical Printing