How I built my Homemade Hand Engraving Machine Part 2 Modify 12v compressor

Modifying a 12volt compressor/tire inflator
Bore = 1.183 Stroke = .500 Volume =.5496 Cu in

👉(((Email me at ralex397@hotmail.com for Free Blueprints)))👈

See video Part 1 for Parts List.
12v Pittsburgh air compressor/inflator $35.99 Harbor Freight
https://www.harborfreight.com/12v-100-psi-high-volume-air-compressor-69284.html
1/8 in OD x 1/8 in MIP LFA-21A $4.50 Hardware store
https://www.homedepot.com/p/Everbilt-1-4-in-O-D-Comp-x-1-8-in-MIP-Lead-Free-Brass-Compression-Adapter-Fitting-800729/207176820
Drill through above fitting .170 dia. Min.
1/4 in OD x 1/8 in FIP LFA-15 $3.50 Hardware store
5 second fix or epoxy Hardware store
10 feet 1/4 in OD x .170 ID clear tubing $1.75 Hardware store
5/16-24 set/grub screw Hardware store
Basic hand tools
TIP;
The above parts are what I was able to find at the hardware store,
not knowing what your store is going to have in stock I would suggest
taking the head of the compressor with you to try what they have until
you are able to adapt it for the 1/4 inch tubing. If your lucky there may
be someone who can help you.

video part 3; I will modify the 50 cal. ammo can.

Sergey Waltman https://youtu.be/YrQTq_QxRFs
Shaun Hughes channel: https://youtu.be/GdT7hMV_cfo
https://www.youtube.com/watch?v=eXqn0lTUX9sther videos on building a machine;
Nejc Mazej; https://youtu.be/EsgTPorNvv4
Karl Månsson; https://youtu.be/echzuhkoYb0
Cliffs Shed; https://youtu.be/sx7VTFChSxA
Joaquin Ryder; https://youtu.be/An4kSkJxDZ8
NightProwlerInc; https://youtu.be/3hvZlkGE4_A
https://www.youtube.com/watch?v=inuOzxEswKY
https://www.youtube.com/watch?v=kaGxlB2538I&t=4s

Видео How I built my Homemade Hand Engraving Machine Part 2 Modify 12v compressor канала Rick Alexander