Reclaim Shop Space and Storage With Above Garage Door Shelves
http://www.AsWoodTurns.com
with my new shop area, I need to get organized and stow away both shop and household items that are currently taking floor space. After researching above door commercial storage units, I decided to make the shelves myself from lumber.
Strength comes from:
1. Mounting on the wall above the garage doors.
2. Mounting on the side walls at each end.
3. Posts from the attic about 9 feet on center.
4. Torsion box effect from sheathing both top and bottom of the framing.
With the shelf there is about 20 inches of storage height - enough for most bins and boxes that would be light enough for me to lift on the shelf. The shelf is 32 inches deep and about 38 feet long. 220 volt electrical service runs to the center with 110 service to both ends.
Cost is about $250 including electric wiring.
One essential tool is my Paslode power nailer. It is cordless and hoseless running on a battery and a fuel cell.
With a project of this sort, there are no re-takes. No chance to re-shoot a segment. With space so tight and dark, photography and sound was very difficult.
Back to woodturning next week.
Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready.
Blog: http://www.AsWoodTurns.com
FB: http://www.Facebook.com/AsWoodTurns
Music: Bach Guitar Calm under license via Adobe Premiere Elements Smart Sound.
Видео Reclaim Shop Space and Storage With Above Garage Door Shelves канала As Wood Turns
with my new shop area, I need to get organized and stow away both shop and household items that are currently taking floor space. After researching above door commercial storage units, I decided to make the shelves myself from lumber.
Strength comes from:
1. Mounting on the wall above the garage doors.
2. Mounting on the side walls at each end.
3. Posts from the attic about 9 feet on center.
4. Torsion box effect from sheathing both top and bottom of the framing.
With the shelf there is about 20 inches of storage height - enough for most bins and boxes that would be light enough for me to lift on the shelf. The shelf is 32 inches deep and about 38 feet long. 220 volt electrical service runs to the center with 110 service to both ends.
Cost is about $250 including electric wiring.
One essential tool is my Paslode power nailer. It is cordless and hoseless running on a battery and a fuel cell.
With a project of this sort, there are no re-takes. No chance to re-shoot a segment. With space so tight and dark, photography and sound was very difficult.
Back to woodturning next week.
Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready.
Blog: http://www.AsWoodTurns.com
FB: http://www.Facebook.com/AsWoodTurns
Music: Bach Guitar Calm under license via Adobe Premiere Elements Smart Sound.
Видео Reclaim Shop Space and Storage With Above Garage Door Shelves канала As Wood Turns
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Garage Storage Shelves - 161DIY Garage Storage Shelves - Threaded Rod Suspension SystemAbove garage door storage for only $60!?DIY Hanging Shelves, Garage Storage Built with Steel StrutUni Strut garage shelvingHow we built over garage door storage!!!Organising Junk and Making SpaceHow to build simple Garage Storage ShelvesDIY Hanging Storage Shelves with Sliding Doors - Overhead Garage StorageUse The Space Over Your Garage Door For StorageReclaim your GARAGE w/ DIY Garage Storage Shelves 🚘 FREE PLANS!How To Make Suspended Garage Storage Shelves for Under $200 || DIY Storage ProjectHow to make sturdy 2x4 garage shelves easy or complicated!Up-high garage shelvesDIY inexpensive Cantilever Garage Storage SystemGarage Storage AreaGarage Shelving Ideas DIYGarage Shelf | Self Supporting Wall Hung Suspended & Heavy Duty | How To DIYHow to Hang a Ladder From the CeilingHow to build a strong cheap shelf using chains to support it