Restoration of Very TIRED and Rusty AXE

Hello folks! Today I will show you the restoration of a very "tired axe". It's hard to imagine how many times it was sharpened and used. But I'll give it a second chance and he'll be as good as new! Well, let's start the restoration.

The first duty I did was to remove the old piece of the axe handle, the wire and the rusty wedge. I placed the axe in a rust remover, after cleaning I placed the axe in warm water with soda to neutralize the acid.

This axe turned out to have no cutting edge left at all. And I decided to forge a new one. To do this, I cut off the rest of the cutting edge from the axe and welded a piece of file with the help of a welding machine.

Then I went to my friend's workshop where I forged a new cutting edge for the axe, carried out the normalization process three times and tempered the axe in oil. The hardening went great!

After that, I made new descents at the axe, made a new axe handle from beech and conducted an interesting test for you! Please don't forget to share this video and leave your comments! Thanks for your attention

Sincerely, Alex. Thanks for attention!
Good luck and health to everyone! With best wishes, Alex!
Please subscribe to my channel: http://bit.ly/2FZ43bV
🍖 My New Cooking channel! https://bit.ly/3LzC3LD
If you want to support me - Patreon: http://bit.ly/39pK6ZB
If you want to support me - Paypal: https://bit.ly/3FA3CB1
Facebook: http://bit.ly/2LnIwxB
Instagram: http://bit.ly/2Gbnvlt

#screwsandtools #axe #restoration

Видео Restoration of Very TIRED and Rusty AXE канала Screws And Tools