FIX: Balance Port Voltage Match Error - ToolKitRC M6D [Needed to Calibrate Main Output Voltage]

Thanks to all those who commented on the previous video, and Lucy from ToolKitRC for helping me solve this issue!

Link to ToolKitRC's calibration video: https://youtu.be/NO8qDlkFiKI
Link to my original M6D error video: https://www.youtube.com/watch?v=NVWMcNir-i4
😩 FRUSTRATED? Confused? Get HELP! Book a 1-on-1 coaching session with me! https://ownnit.com/o/RCwithAdam

YOU CAN SUPPORT ME:
💪 Become a WINGMAN: Get a good feeling in your heart and access to 3D printable designs, and more! https://www.rcwithadam.com/membership
OR
👌 KO-FI: https://ko-fi.com/rcwithadam
OR
👍 PATREON: https://www.patreon.com/RCwithAdam
Thanks!

🧠 FREE courses and more for FPV Drones, RC Aircraft & 3D Printing at http://rcwithadam.com/
-------
Mandatory Affiliate Disclaimer:
Any links in this description may be affiliate links, which means I make a very small commission (at no additional cost to you) when you make a purchase through that link.
**DISCLAIMER: Remember to always use caution and your best judgement when building and flying RC aircraft, and when working with 3D printers, electronics, or electrical devices. Be mindful of the laws, regulations, and best practices for your particular location. Be a good neighbor, and HAVE FUN!**
-----------
About RCwithAdam: Adam's goal is to HELP YOU build your skills and eliminate frustration and confusion through creative, educational, and encouraging videos featuring Radio Control airplanes, FPV drones, electronics, and 3D printing!
#RCwithAdam #toolkitRC

Видео FIX: Balance Port Voltage Match Error - ToolKitRC M6D [Needed to Calibrate Main Output Voltage] канала RCwithAdam