3D Printed Circular Sock Knitting Machine
This is a demonstration of my new 3D printed circular sock knitting machine (cskm).
In this video I show how to get the knitting started and what to do with skipped stitches. I also show how to switch from a waste yarn to the main yarn you will use. Various other tips are also mentioned.
A close up of how the loops are formed is at the end of the video.
I am not the original designer of these 3D printing files. My goal for this video is to demonstrate how to use it should you choose to print it and to help save you the hours of searching I took to figure it out. I have been knitting since 2009, however this is my first foray into machine knitting. I am using yarn gifted to me without a ball band. It is likely fingering weight. The weights used are washers, but were purchased in a kit for putting weight on warp threads during weaving, thus I call them weights. I hope you find this video helpful and thank you so much for watching and subscribing!
The printer: Creality Ender 3.
Here's a link to the free files for printing the sock knitter:
https://www.thingiverse.com/thing:3310883
Also, a link to my make with some helpful tips, including which needles I purchased on Aliexpress:
https://www.thingiverse.com/make:646231
Here's a link to a file I customized to be an 80 slot cylinder for this machine. Please read the instructions carefully! I could not customize one part and had to finagle a solution you will have to repeat to make it print correctly for this machine. Also in the works are a 54 and 72 slot cylinder, but they are not yet published.
https://www.thingiverse.com/thing:3651884
I used Cura to prepare the files for the printer. This is a free program. https://ultimaker.com/en/blog/52831-simplify-3d-printing-with-ultimaker-cura-40
The Filiment: Hatchbox PLA 1.75 mm filament which can be purchased on Amazon in multiple different colors.
Видео 3D Printed Circular Sock Knitting Machine канала MammaKH3
In this video I show how to get the knitting started and what to do with skipped stitches. I also show how to switch from a waste yarn to the main yarn you will use. Various other tips are also mentioned.
A close up of how the loops are formed is at the end of the video.
I am not the original designer of these 3D printing files. My goal for this video is to demonstrate how to use it should you choose to print it and to help save you the hours of searching I took to figure it out. I have been knitting since 2009, however this is my first foray into machine knitting. I am using yarn gifted to me without a ball band. It is likely fingering weight. The weights used are washers, but were purchased in a kit for putting weight on warp threads during weaving, thus I call them weights. I hope you find this video helpful and thank you so much for watching and subscribing!
The printer: Creality Ender 3.
Here's a link to the free files for printing the sock knitter:
https://www.thingiverse.com/thing:3310883
Also, a link to my make with some helpful tips, including which needles I purchased on Aliexpress:
https://www.thingiverse.com/make:646231
Here's a link to a file I customized to be an 80 slot cylinder for this machine. Please read the instructions carefully! I could not customize one part and had to finagle a solution you will have to repeat to make it print correctly for this machine. Also in the works are a 54 and 72 slot cylinder, but they are not yet published.
https://www.thingiverse.com/thing:3651884
I used Cura to prepare the files for the printer. This is a free program. https://ultimaker.com/en/blog/52831-simplify-3d-printing-with-ultimaker-cura-40
The Filiment: Hatchbox PLA 1.75 mm filament which can be purchased on Amazon in multiple different colors.
Видео 3D Printed Circular Sock Knitting Machine канала MammaKH3
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![How Circular Knitting Machines Work? Designing one from scratch - BANDARRA](https://i.ytimg.com/vi/yM4Rb0DTyKU/default.jpg)
![3d printed knitting machine](https://i.ytimg.com/vi/6jEAtUjXlWs/default.jpg)
![3D print your own sock knitting machine](https://i.ytimg.com/vi/06o0Ij_zx40/default.jpg)
![12 3D printed tools you need for your workshop](https://i.ytimg.com/vi/tO5Ym6-H2Ac/default.jpg)
![Sentro Knitting Machine Demo & Review with Mister Domestic](https://i.ytimg.com/vi/l8is_pDXeI8/default.jpg)
![Vintage Sock Machine Intro (making silk stockings)](https://i.ytimg.com/vi/tCQzaODgUo0/default.jpg)
![3D Printed CSM Circular Sock Knitting Machine: Ribber](https://i.ytimg.com/vi/jWfXnNy6-ec/default.jpg)
![QUICK 10 Minute SOFT Fuzzy Socks // 22 Pin Circular Knitting Machine // Free Pattern DIY Video](https://i.ytimg.com/vi/sLjNDT3WQvY/default.jpg)
![My 3D Printed Harmonic Drive Performs Surprisingly Well!](https://i.ytimg.com/vi/Emvo3bLT-Z4/default.jpg)
![LT150 Video 7 - Knitting the Entire Sock, Cuff Down](https://i.ytimg.com/vi/JVTExIJNB3E/default.jpg)
![Extrusion Width - The magic parameter for strong 3D prints?](https://i.ytimg.com/vi/9YaJ0wSKKHA/default.jpg)
![How To Knit A Flat Panel On The Sentro Circular Knitting Machine](https://i.ytimg.com/vi/1qznrq6DflU/default.jpg)
![Getting Started on the Circular Sock Machine](https://i.ytimg.com/vi/mq2HOYYWsdc/default.jpg)
![Tiny Sock on the CSM](https://i.ytimg.com/vi/47r90bw9IhY/default.jpg)
![3D Printed CSM Circular Sock Knitting Machine: Version 2](https://i.ytimg.com/vi/R-kLgEVMh3g/default.jpg)
![SPIN #96 - Help Design a Circular Knitting Machine](https://i.ytimg.com/vi/-ZEiBQ9mCS4/default.jpg)
![Part One Addi Knitting Machine Short Row Sock](https://i.ytimg.com/vi/J-oAXjAsGYE/default.jpg)
![About Lamb's LT150](https://i.ytimg.com/vi/d4XUw-BZaVs/default.jpg)
![The STRENGTH of 3D prints REMELTED in SALT](https://i.ytimg.com/vi/DyAKtS1b3SQ/default.jpg)
![Vintage Sock Knitter (making a sock)](https://i.ytimg.com/vi/7N7hsho4Sjg/default.jpg)