Micro-T Speed Run (4s - 54 MPH)

Running my 4s in the stadium again, this time I was able to give full thr with 4s. Although lipos didnt have all the juice in the pass-bys (forget other packs, trim steering, and crashed in first runs) :P

For the sake of ease to understand I stayed with 5m in the video. First for the starting and end points of measurement: yellow line was the start (with first bag), and the second bag was the finish (5m), but it wasnt perfect, camera didt capture. So, there is a blue line (look carefully) right before second bag, distance is 4.8m between lines, and she is almost touching it. So to be more precise and almost perfect: 5f/25fps=0.2s 4.8m/0.2s=24m/s 24m/s=86km/h=54mi/h

raw video: http://www.kargidesign.net/MOV01005.MPG

I wont do a speed run with this micro again, because she is not low and long enough, and I dont want to risk alu parts anymore. Will build a speed micro-dt.

Also I want to say thanks to bülent çavuşoğlu, the respected brother who help me shoot these videos in the hot summer afternoons. He owns a hobbyshop in Turkey, shipping worldwide, you may check-out vintage tamiya's, wooden kits and more: http://www.modelizmo.com

Stay tuned (subscribe) for 5s :)

http://www.microtforum.com/forum/viewtopic.php?p=75583#75583

--

This is the second upload of this video, becuase frame per second is not 24 but 25. sorry for that.

By the way, as we can see tamiya dyno's deviates more on high speeds, due to increasing air friction (she flies like in the first shot), dyno reading for this setup was above 62mph.

Видео Micro-T Speed Run (4s - 54 MPH) канала Sinan Kargı