How and Why to Install a Neck Shim on a Fender Bolt On Neck
To shim or not to shim... that is the question. Answer: SHIM. Sometimes when setting up a guitar, you get to the point where you have done everything you can, but can still hear fret buzz or dead notes when bending. Often times this is because the neck needs a shim.
In this video I show how to make a neck shim out of a cereal box cardboard for my friend’s Fender Telecaster (works on Stratocaster too). Believe it or not, a thin piece of card is all you need. You can do this on any bolt on neck guitar, Fender, squier, Ibanez, Godin... as long as it has a bolt on neck, a shim is very useful. If you have a glued in neck like an Epiphone of Gibson, this method will obviously not work.
I got a lot of info on neck shims from a channel called Dillon Talks Tone. https://youtu.be/zULjh_SRm-c
Видео How and Why to Install a Neck Shim on a Fender Bolt On Neck канала Kennis Russell
In this video I show how to make a neck shim out of a cereal box cardboard for my friend’s Fender Telecaster (works on Stratocaster too). Believe it or not, a thin piece of card is all you need. You can do this on any bolt on neck guitar, Fender, squier, Ibanez, Godin... as long as it has a bolt on neck, a shim is very useful. If you have a glued in neck like an Epiphone of Gibson, this method will obviously not work.
I got a lot of info on neck shims from a channel called Dillon Talks Tone. https://youtu.be/zULjh_SRm-c
Видео How and Why to Install a Neck Shim on a Fender Bolt On Neck канала Kennis Russell
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![How to shim a guitar neck to adjust its angle](https://i.ytimg.com/vi/kIUzd0IjchU/default.jpg)
![The School Strat Build - Best Bolt-on Neck Method...ever!](https://i.ytimg.com/vi/zsMCR_TZ-0c/default.jpg)
![Tutorial - How to Shim Your Guitar Neck and Nut](https://i.ytimg.com/vi/FlmSeVMLr_w/default.jpg)
![Why Is My Guitar Buzzing? (Fixing Fret Buzz)](https://i.ytimg.com/vi/NzEsWhdqvF0/default.jpg)
![Why A Fender Strat Or Tele With Humbuckers Doesn't Sound Like a Gibson](https://i.ytimg.com/vi/PO7OeyG9oqw/default.jpg)
![Dylan Talks Tone - Neck Shims, Good Bad ? #149](https://i.ytimg.com/vi/zULjh_SRm-c/default.jpg)
![How To | Micro-Tilt Adjustment & How it Works | Fender](https://i.ytimg.com/vi/7ekS4KBMpVY/default.jpg)
![How To Fix Bad String Alignment On Fenders & Squiers. Sharpen My Axe](https://i.ytimg.com/vi/XJNrG2iqBO4/default.jpg)
![Fender Squier Stratocaster Mods - 3 Easy Mods to Make Your Strat Play Great!](https://i.ytimg.com/vi/iLV2H2dx3N0/default.jpg)
![How To Properly Shim A Guitar Neck](https://i.ytimg.com/vi/6pzS3QSRv9U/default.jpg)
![Fret Leveling - The Easy Way // How To](https://i.ytimg.com/vi/pbr0VR2CdQM/default.jpg)
![How To (Or How NOT To) Fit and Install a Fender Style Neck](https://i.ytimg.com/vi/Pj9CETVxFDE/default.jpg)
![Offset 101: Shims & the Offset Bridge](https://i.ytimg.com/vi/dhgcZN01wx8/default.jpg)
![Change the angle of a neck with StewMac Neck Shims](https://i.ytimg.com/vi/8FsB76XpWkM/default.jpg)
![Do Not Buy New Pickups before watching this. Sharpen My Axe](https://i.ytimg.com/vi/GEI6WENv990/default.jpg)
![Understanding guitar truss rod adjustment](https://i.ytimg.com/vi/SAg6Kvbr_OU/default.jpg)
![Get rid of fret buzz FOREVER! common guitar setup problems and basic fret leveling](https://i.ytimg.com/vi/P9kGnvpT5YQ/default.jpg)
![I Put a Vintage 60s Fender Strat Neck on a Squier. How did it sound?](https://i.ytimg.com/vi/WCleEK5en7Y/default.jpg)
![Podcast 42 - How to Shim a Strat Neck - masking tape or wood?](https://i.ytimg.com/vi/F818IbmV52c/default.jpg)
![Fitting a Fender style Neck](https://i.ytimg.com/vi/76O54CUovD0/default.jpg)