GE Dishwasher Pressure Sensor Assembly Replacement | H2O Error FTD Error Code | Part WD21X25468

H2O error code or FTD error code? This video shows you how to replace the pressure sensor assembly on a GE dishwasher. The pressure sensor monitors the water level inside the dishwasher and sends that information to the control system so the dishwasher can fill, wash, and drain correctly. If the pressure sensor fails electrically or becomes clogged with grease, debris, or mineral buildup, the dishwasher may not fill properly, may stop mid cycle, or may display a pressure sensor related error code. Replacing a faulty pressure sensor restores accurate water level monitoring and helps the dishwasher operate as intended.

Purchase a new Pressure Sensor Assembly here:
https://partsdr.com/part/wd21x25468-pressure-sensor

Part Description:
Dishwasher pressure sensor assembly. This is a new GENUINE GE replacement part.

Part Number:
PD00067609
Manufacturer Part Number:
WD21X25468
Manufactured By:
GE OEM

Error codes:
FTD - Failure to Drain
H2O - not detecting the proper water level during the fill portion of the cycle

This Part PD00067609 (Mfg # WD21X25468) replaces these parts:
WD21X32082

Our Competitor’s Part Numbers for this part:
4962334
AP6976524
PS12741258
FIX12741258

Part Production Numbers:
265D3356P001

Compatible Brands:
GE

Appliance shown in video: GE Dishwasher GDT550PYR7FS

Video Chapters:
00:00 Intro
00:14 What the pressure sensor does
00:28 Common pressure sensor failures
00:40 Symptoms of a bad pressure sensor
00:59 Why replacing the sensor matters
01:14 Tools needed
01:18 Safety and power disconnect reminder
01:25 Water leak warning and towel tip
01:31 Accessing the pressure sensor in place
01:39 Removing the dishwasher for demonstration
01:52 Dishwasher removal considerations
02:03 Locating the pressure sensor
02:07 Releasing the locking tab
02:15 Rotating and removing the pressure sensor
02:22 Disconnecting the electrical connector
02:27 Removing the sensor from the appliance
02:30 Closer look at the pressure sensor
02:46 How water pressure is measured
02:52 How the Pressure Sensor Works
03:04 Causes of inaccurate pressure readings
03:11 Cleaning versus replacing the pressure sensor
03:27 Why OEM pressure sensors matter
03:56 Installing the new pressure sensor
04:11 Locking the sensor into the sump
04:22 Restoring power and testing for leaks
04:34 Reinstalling the kick plate
04:40 Closing remarks

Appliances break, but repair and maintenance do not need to be difficult. Find the right part for your job at: https://partsdr.com/

We sell OEM appliance parts for Whirlpool, Maytag, Kenmore, Amana, Estate, Roper, Frigidaire, Electrolux, Tappan, Westinghouse, Kitchen Aid, Jenn Air, Bosch, LG, Samsung, and more.

If you found this video helpful, please click the thumbs up button and leave us a comment below.
Connecting with us:
Facebook: https://facebook.com/PartsDr

Twitter: https://x.com/parts_dr

Repair Forum: http://forum.partsdr.com/

Blog: https://partsdr.com/blog/

Subscribe to our Youtube channel: https://www.youtube.com/PartsDr?sub_confirmation=1

If you found this video helpful, like and subscribe for more appliance repair guides. Got questions? Drop them in the comments below.

#GE #ApplianceRepair #DIY #PartsDr

Видео GE Dishwasher Pressure Sensor Assembly Replacement | H2O Error FTD Error Code | Part WD21X25468 канала Parts Dr