GSAT PINOY DIGITAL TV INSTALLATION

GSAT PINOY INSTALLATION PROCEDURE. 1.unboxing. 2. Install sattelite dish and attach LNB to the holder. 3. connect two cable connector to each end point of coaxual cable and connect it to LNB output of gsat box & the other point to LNB input. 4. connect RCA jack cord from gsat box, color yellow from video gsat box output and the other end point to TV video input. while RCA color white connect it to audio output of gsat box and audio input of tv or monitor. 5. connect the power adaptor of gsat box and plug it to the outlet and switch on your tv/monitor and gsat box respectively. when the gsat appear to your tv monitor, hit the MENU boton of GSAT BOX remote control & put INSTALLATION then OK. put password "0000" then OK and put highlight to ANTENNA SET UP then OK using remote control. 6. start pointing sattelite dish facing to soundern direction slowly between west and south area in horizontal & vertical procedure until you get good quality of signal. 7. when you got good signal, the power & quality bars seen on tv monitor will change its color from red to green. if you are satisfy the quality of signal, hit the blue botton of remote control of gsat for finalizing and to save & exit authomatocally and wait until the processing is done. Enjoy watching and dont forget to LIKE while viewing my video & hit the SUBSCRIBE and notification BELL after viewing for notifying you more new incomming video tutorial from my you tube channel, thank you so much and god bless.

Видео GSAT PINOY DIGITAL TV INSTALLATION канала Rolando Tabigue Vlog