How to Install Corrugated Metal on Interior Walls with Shiplap Halfway Down

In this how-to video filmed at Hidden Pond Place, I go into detail as to how I covered the lower half of the laundry room walls at my homesteads newly created laundry room. This was the first time that I used corrugated metal as an interior building material and I am hoping this video helps some others who are looking to do a similar project to avoid some of the mistakes that I made. Below you will find time bookmarks to the various sections of the video so that you can just skip to the portions that interest you most. If you enjoyed the video, please subscribe for further how-to videos and other homesteading videos at Hidden Pond Place. Thanks and Peace!

:50 - The importance of gloves when working with corrugated
sheet metal
1:00 - Sharp tin snips will help you save time and frustration
1:25 - Make sure you have enough space
to measure and cut your material at a
comfortable level
1:57 - Know your materials width and length
as it relates to where
you are planning on installing it
3:08 - You can attach on top and
bottom of the panel. Using this
method you do not have to worry
about the location of the studs as much
5:09 - Measuring for and preparing for electrical outlets
7:08 - Electrical Outlets continued, the objective of the finished
product
7:48 - In this section, I explain what work
we will be doing together
so that you can see the installation
of one piece of corrugated metal
from start to finish
8:04 - Using clear tape before
marking cut lines can
save you the hassle of removing
marks later
9:10 - My method for cutting the
corrugated metal
11:34 - Attaching the corrugated
metal to the interior wall
12:43 - Creating and working with trim
14:05 - A final look and thank you

Видео How to Install Corrugated Metal on Interior Walls with Shiplap Halfway Down канала Slowpokes Adventures