FPV49 v3 Plans & Some Build Tips
Updated build video: http://www.youtube.com/watch?v=r7ytCO...
Note: Plans 5:59 in video and in description.
Scratch built FPV flying wing made out of depron and carbon rods.
Incredible stable for high quality FPV footage!
Please don't hesitate to make suggestions for improvements :)
CG approx 25 til 26cm from the front of the plane (before cutting camera bay)
Build threads with drawings:
http://flitetest.com/articles/fpv49-build
http://fpv.no/vbulletin/showthread.php/2390-FPV49-Scratch-built-FPV-KFm-Airfoil (see post 2)
UPDATE: So I made the plane and it flies real nice
- http://youtu.be/dh4GjMbsCk8
The maiden was a little bit interesting for me, did a lot of mistakes that I had to correct. Turns out testing a bunch of new equipment and setup on a brand spanking new plane wasn't the best of ideas:
- http://youtu.be/XU1n7o51r7U
The plane is based on the Kline--Fogleman airfoil KFm-4. For more information see:
http://en.wikipedia.org/wiki/Kline%E2...
&
http://rcfoamfighters.com/blog/?p=496
Prop: 9 x 6
http://www.hobbyking.com/hobbyking/st...
Motor: 1400KV / 88,3gram / 420W
http://www.hobbyking.com/hobbyking/st...
ESC:50A
Battery: 3cell (11.1V) 2650mAh (25-50C) (when using GoPro) // 4000mAh 3cell without GoPro
RC Receiver: 35MHz full range dual conversion (corona)
Plans:
http://i45.tinypic.com/2wr3i3t.png
http://i48.tinypic.com/10saatl.png
Music by: CMA
https://www.youtube.com/user/epzonix
Видео FPV49 v3 Plans & Some Build Tips канала FPVTrond
Note: Plans 5:59 in video and in description.
Scratch built FPV flying wing made out of depron and carbon rods.
Incredible stable for high quality FPV footage!
Please don't hesitate to make suggestions for improvements :)
CG approx 25 til 26cm from the front of the plane (before cutting camera bay)
Build threads with drawings:
http://flitetest.com/articles/fpv49-build
http://fpv.no/vbulletin/showthread.php/2390-FPV49-Scratch-built-FPV-KFm-Airfoil (see post 2)
UPDATE: So I made the plane and it flies real nice
- http://youtu.be/dh4GjMbsCk8
The maiden was a little bit interesting for me, did a lot of mistakes that I had to correct. Turns out testing a bunch of new equipment and setup on a brand spanking new plane wasn't the best of ideas:
- http://youtu.be/XU1n7o51r7U
The plane is based on the Kline--Fogleman airfoil KFm-4. For more information see:
http://en.wikipedia.org/wiki/Kline%E2...
&
http://rcfoamfighters.com/blog/?p=496
Prop: 9 x 6
http://www.hobbyking.com/hobbyking/st...
Motor: 1400KV / 88,3gram / 420W
http://www.hobbyking.com/hobbyking/st...
ESC:50A
Battery: 3cell (11.1V) 2650mAh (25-50C) (when using GoPro) // 4000mAh 3cell without GoPro
RC Receiver: 35MHz full range dual conversion (corona)
Plans:
http://i45.tinypic.com/2wr3i3t.png
http://i48.tinypic.com/10saatl.png
Music by: CMA
https://www.youtube.com/user/epzonix
Видео FPV49 v3 Plans & Some Build Tips канала FPVTrond
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
FPV49 v3 Build VideoSipkill FPV 1m Wing Build"The Hundo" A 100 Inch Flying Remote Control WingFPV49 v1 Plans & Some Build TipsHow to - KFm AirfoilsFPV49 V4 kfm-6 Build photos(FPVTrond plans).Delta Scratch Build VideoSYNAPSE Foamboard Flying Wing - Intro VideoDepron wing buildThe aerodynamics of flying wings (part 2)FT Mighty Mini Arrow - DIY Build | Flite TestFPV49 v4 Plans & Some Build TipsKako napraviti leteće krilo ZAGI - homemade rc flying wingFlite Test - FT Versa Wing - Pusher Conversion + FPV SetupHow to Build a Foamboard Delta Wing from Scratch (Timelapse)SYNAPSE WING BUILD - Method A: Build Then CutTexas Wing Weekend | Flite TestBuild Super Simple Blunt Nose Wing (TikoWing V4)FT Spear - BUILD | Flite TestDesigning and building a flying wing RC model from scratch XFLR5