How To Install Fog Lights

How to install fog lights on a acura tsx 2004-2005 models
in this video I'll be explaining step by step on how to install fog lights on your Acura TSX 2004-05
Step 1: Pop the hood and remove the "clips" from the grill and the upper bumper. Step 2: Remove the self tapping screws on both very ends of the bumper meeting the fender well. Step 3: remove clips and (4) 10mm bolts that will mount to the fenderwell cover and the undercar splash shield. Step 4: Slowly remove front bumper from the vehicle and lay on a blanket or surface that will suit your installation and wont tip over. Step 5: Pop off the fog light covers, its that easy
. Step 6: gather your hardware from your kit.
Step7: Install hardware like so.
Step 8:Prep the front bumper with Self tapping screws retainer clips.
Take switch panel out disconnect then install your switch to switch panel and wire harness to the fog light switch run ground wire to the ground you see in the video run power wire to your acc wire and you should be all set with the switch part. Then connect the fog lights harness install bumper and all plastics covers back and boom 💥 hope you enjoy your new fog lights guys

comments any question i will respond so if you need any help just comment down below thanks for watching please share subscribe more content on how to CGFIX am going to bring content on how to fix clean and install videos why pay somone when you can do it your self! so hit the notification so you wont miss out on the next video again thanks guys for watching!
leave feed back thanks!
Non-copyrighted background Music !
https://youtu.be/T5o_0BoTvWg

Видео How To Install Fog Lights канала CGFIX