HDPE Maker Knife Upgrade || Quick Cuts
Want to customise your Maker Knife by Giaco? Us too! We went with recycled plastic, just like we did before in our HDPE Mallet video.
On our first attempt we used nuts with a similar thickness to the plate to try and keep the plastic a uniform thickness. This worked really well but we didn't get the marble effect that we were hoping for. So we made a custom steel mould and made a thicker block of plastic, which we could slice into blanks to make our custom plate.
We think this turned out awesome and we love that it's totally unique!
If you've been hiding under a rock and have no idea what a 'Maker Knife' is then check out the video or website below:
https://www.youtube.com/watch?v=sSfhTlBm5xI&t=547s
https://makerknife.backerkit.com/hosted_preorders#store
Consider supporting us on PATREON:
https://www.patreon.com/brothersmake/
Follow us on INSTAGRAM:
https://www.instagram.com/brothersmake/
Link to our MERCH store:
https://teespring.com/en-GB/stores/brothersmake
STARBOND SUPERGLUE 10% off using BROTHERSMAKE10 or click the link below:
https://www.starbond.com/?rfsn=3704868.592ffa8
Music:
'Complicate ya' - Otis McDonald
'Uh-Oh' - Slynk
Видео HDPE Maker Knife Upgrade || Quick Cuts канала Brothers Make
On our first attempt we used nuts with a similar thickness to the plate to try and keep the plastic a uniform thickness. This worked really well but we didn't get the marble effect that we were hoping for. So we made a custom steel mould and made a thicker block of plastic, which we could slice into blanks to make our custom plate.
We think this turned out awesome and we love that it's totally unique!
If you've been hiding under a rock and have no idea what a 'Maker Knife' is then check out the video or website below:
https://www.youtube.com/watch?v=sSfhTlBm5xI&t=547s
https://makerknife.backerkit.com/hosted_preorders#store
Consider supporting us on PATREON:
https://www.patreon.com/brothersmake/
Follow us on INSTAGRAM:
https://www.instagram.com/brothersmake/
Link to our MERCH store:
https://teespring.com/en-GB/stores/brothersmake
STARBOND SUPERGLUE 10% off using BROTHERSMAKE10 or click the link below:
https://www.starbond.com/?rfsn=3704868.592ffa8
Music:
'Complicate ya' - Otis McDonald
'Uh-Oh' - Slynk
Видео HDPE Maker Knife Upgrade || Quick Cuts канала Brothers Make
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
DIY Recycled Plastic Stool - Furniture made from HDPE!HDPE Knife Handle - Recycled Plastic Chef’s Knife ScalesDamascus Mallet from plastic bottlesExtrude beams from plastic waste #preciousplasticHDPE Coffee Cup Carrier - Flat Pack Eco Friendly Design!Knife Making 101: How To Make Your First KnifeNintendo 64 ‘N’ Logo Carved from HDPE - Recycled Plastic Retro GamingHow To Recycle HDPE Bottle Lids Into Flawless Flat Sheet Material - Best ResultsMaking a Recycled Plastic Damascus Knife - Will it Cut?!Precious Plastic - Create things from plastic (part 5.0)HDPE MalletBeginners' Guide to Melting HDPE - How to Make a Recycled Plastic PenMaking A Knife From Pruning Shears6 Roof and Pavement Tiles from Plastic WasteHDPE, How Much Processing Is Required; I Put It To The Test!: 043DIY Bottle Jack Press | Hydraulic HDPE Plastic & Bookbinding PressPrecious Plastic - Build a PRO sheetpress machine and make sheets (part 3.7)How To Recycle HDPE Plastic (High Density Polyethylene) - a simple methodBlue Damascus Steel from chain armor (butcher gloves)この包丁はペットボトルで作られています