Avid / CNC Router Parts Pro CNC Plasma 4848 Table Build
Time-lapse of me assembling my CNC Router Parts (now Avid CNC) Pro CNC Plasma 4848 Table over the winter. Total cleanup and build time was about 9 hours, here it is in 11 minutes.
#cncplasma #cncrouterparts #avidcnc
Audio is a bit wacky, still figuring out best settings for that for these sped up builds.
Видео Avid / CNC Router Parts Pro CNC Plasma 4848 Table Build канала GreyCat Workshop
#cncplasma #cncrouterparts #avidcnc
Audio is a bit wacky, still figuring out best settings for that for these sped up builds.
Видео Avid / CNC Router Parts Pro CNC Plasma 4848 Table Build канала GreyCat Workshop
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![CNC Plasma Cutting Table Assembly and First Cut](https://i.ytimg.com/vi/ugjJXa6Sfl0/default.jpg)
![Avid CNC Router Overview](https://i.ytimg.com/vi/N3nNyAVFKKI/default.jpg)
![CNC Plasma Cut Magnet Levers - Marble Machine X #37](https://i.ytimg.com/vi/_roikOlK-OI/default.jpg)
![The Ultimate Desktop CNC Router Comparison - Which Should You Buy?](https://i.ytimg.com/vi/bTuqAPaHFGI/default.jpg)
![New Machine: Avid Benchtop Pro CNC with ClearPath and Centroid Acorn](https://i.ytimg.com/vi/Wji6fh1nuUY/default.jpg)
![DIY Vacuum Bed For An Avid CNC](https://i.ytimg.com/vi/SaxSqHA2smc/default.jpg)
![Pro-Build: Installing Avid CNC PRO Electronics](https://i.ytimg.com/vi/dpnxHS2gpP0/default.jpg)
![Testing Finishing Techniques for Acrylic Edge After Cutting with CNC](https://i.ytimg.com/vi/pCfI8w17GCo/default.jpg)
![CNC Router Build Part 4 First Look At The Masso Controller And It's starting to move](https://i.ytimg.com/vi/6Rf7sWRYPpw/default.jpg)
![Homemade CNC Plasma FINISHED! Ep.4](https://i.ytimg.com/vi/6wPAiH7mXjI/default.jpg)
![Langmuir Systems Crossfire XR - Unboxing Through First Cut!](https://i.ytimg.com/vi/MwoxVD_ocig/default.jpg)
![CNC Plasma toolpaths using Vectric software](https://i.ytimg.com/vi/NN1K63hRGpY/default.jpg)
![Why I Bought My Avid CNC](https://i.ytimg.com/vi/GtFabEUcbdE/default.jpg)
![The Ups and Downs of Owning a CNC Plasma Cutter // Lift Arc Studios](https://i.ytimg.com/vi/lNQwaTT6pGI/default.jpg)
![Onefinity Woodworker vs X carve 1000mm // Best CNC machine to buy?](https://i.ytimg.com/vi/PTHxVfXPgDs/default.jpg)
![Building My First CNC! || Avid CNC 4x8 || Ruetsche Builds](https://i.ytimg.com/vi/3xdUKvTYdmo/default.jpg)
![First Cut on the Langmuir Systems CrossFire XR](https://i.ytimg.com/vi/5E5DJzTE59g/default.jpg)
![CNC Plasma - Build your own $6 Torch Height Controller (Mechanical THC) - 100% success rate](https://i.ytimg.com/vi/CsitDV_KtYM/default.jpg)
![Avid CnC Upgrade to 8.7hp Spindle](https://i.ytimg.com/vi/dmgkdJ8t2JY/default.jpg)
![Building A Jeep Cherokee XJ Rear Bumper | Cut On A CNC PLASMA TABLE](https://i.ytimg.com/vi/_APBsZO3fKI/default.jpg)