Clearing Filament Clogs in the Qidi X-Max Extruder.

In this video we show you how to take apart the Qidi X-Max Extruder to clear out any clogs. The main thing you need to make sure here is that you do not accidentally break the two cables going to the heat block. If you accidentally do, you will have to replace the thermistor/thermocouple. If you like this video, please click the like, share, subscribe and notification button to stay up to date on the new videos we release. If you have any questions, suggestions, or just want to let us know that our video helped, please leave a comment below. Thank you for taking time out of your day to watch our video. Hopefully you found this video helpful.

Facebook: https://www.facebook.com/Eitri3D/
Instagram: https://www.instagram.com/eitri3d/
Twitter: https://twitter.com/eitri3d

Links to the items mentioned in the video are listed below. These links are for your convenience.

AMX3d PTFE Teflon Bowden Tube for 1.75 Filament (2.0mm ID/4.0mm OD) – White Connector Tubing for 3D Printer - 1.5 Meters: https://www.amazon.com/Teflon-Bowden-Filament-2-0mm-4-0mm/dp/B01CUPV90M/ref=sr_1_3?dchild=1&keywords=amx3d+ptfe+bowden&qid=1600378843&sr=8-3

Micro Swiss MK10 Plated Wear Resistant Nozzle for PTFE Lined Hotend M7 Threads 1.75 mm, 0.4mm (Flash Forge/Dremel/Wanhao), Bright Nickel: https://www.amazon.com/Micro-Swiss-HW-NOZ-MK10-04-Plated-Resistant-Nozzles/dp/B01BDL4NKM/ref=sr_1_3?dchild=1&keywords=micro+swiss+mk10+plated&qid=1600379039&sr=8-3
Music:
“Viking” Aakash Gandhi
“8th World Wonder” by RKVC
“Life After Death” by DJ Freedem

Видео Clearing Filament Clogs in the Qidi X-Max Extruder. канала Eitri 3D