Create Awesome Lathe Dust Extraction (that really sucks)

Dan creates a dust and shavings catch bin out of plexiglass and upgrades his shop dust extraction system along the way.

00:00 Intro
00:50 deconstruction and construction begins
01:25 French cleat support system for clear ducting
01:42 Creation of bottom half of plexi-glass catch bin
06:00 Creation of top half of the plexi-glass catch bin
07:30 installation of catch system
09:40 test of the system, it really sucks
11:00 extro and outtakes

Materials list:
2 - Pieces of 1/8 plexiglass 18 inch X 26 inch (minimum, may want larger depending on lathe)
1 - 4 inch clear dust extraction tube (from Kit listed below) cut to approximately 3 inches
1 - 2 1/2 inch 90 degree elbow (from kit listed below) with 5 degrees cut of one end
2 - T-track male 1/4-20 bolts with large washers and nuts (to join upper and lower halves)


Links to dust extraction systems components that I used in the video:
https://www.amazon.ca/gp/product/B07Q5JDHX6/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

https://www.homedepot.ca/product/king-industrial-27-pc-4-inch-dust-collection-hook-up-system/1001552461

Visit us on Facebook ...... https://www.facebook.com/TherapyWoodW...​
Or on Instagram................ https://www.instagram.com/woodtherapist/​

Видео Create Awesome Lathe Dust Extraction (that really sucks) канала Dan Fries at Therapy WoodWorks