HOW TO: Burn Your Screens for Screen Printing at Home

This is how I burn my screen printing screens at home. I use emulsion from Anthem Screen Printing, Inkjet transparencies and a homemade exposure unit. It’s really easy, a little messy and a LOT OF FUN.
__

If you want more detailed information about how to burn a screen at home check out my blog.
http://studiomoxy.com/index.php/2017/08/17/burn-screen/
__

Instructions on how to build your own exposure unit can be found here:
https://www.youtube.com/watch?v=3eOpU9-5TZI
__

Want to buy the same screen printing supplies I use? Go here (Not sponsored or affiliate linked):
https://www.anthemprintingsf.com
screen printing emulsion:
https://www.anthemprintingsf.com/WR-25-Water-Resistant-Photo-Emulsion-QUART-p/wr-25-qrt.htm
emulsion remover:
https://www.anthemprintingsf.com/EnviroStrip-Emulsion-Remover-p/cci-es-qrt.htm
degreaser:
https://www.anthemprintingsf.com/Pink-Stuff-Dehazer-and-Degreaser-p/pinkstuff-qrt.htm
emulsion coater:
https://www.anthemprintingsf.com/Dual-Edged-Emulsion-Scoop-Coater-p/scoop.htm
screens:
https://www.anthemprintingsf.com/Aluminum-Screen-20-x-24-160-Mesh-p/screen-1820-160a.htm
__

OTHER PLATFORMS

BLOG // http://www.studiomoxy.com
INSTAGRAM // https://www.instagram.com/studiomoxy/
TWITTER // https://twitter.com/studiomoxy

DIY & HOW-TO CHANNEL // https://www.youtube.com/c/StudioMoxy
__

Not sponsored.
__

Please note that all projects seen on my channel must be completed at your own risk. I do not take responsibility for any harm or injury that may occur. Be safe!

Видео HOW TO: Burn Your Screens for Screen Printing at Home канала Studio Moxy