Zodiac MX8 Getting Stuck, Moving Slowly or Going in Small Circles
In this video I will show you how to solve the main three problems you will have with your Zodiac MX8 as it gets older. The unit here is 3 years old. I will show you how to fix your MX8 if it is going in small circles in the pool, getting stuck on the steps or in a corner and if it is moving very slowly even with very good suction.
I was going to make it into three separate videos but I figured if you have an MX8 you will need to do both or all three repairs eventually so you might as well see it all at once.
Here are the parts you will need for this:
(1) Mx 8 Engine Assembly R0524900
(1) Mx 8 Direction Control Device Side B R0524800
(1) Mx 8 Direction Control Device Side A R0524700
(2) Bearing (Wheel & Engine) R0527000
The great thing about the MX8 is that it an easy cleaner to work on. It is pretty well engineered but it is a gear cleaner so the parts that drive it will wear out.
The first thing I show is if the cleaner is moving in small circles in the pool. I took this solution from Troublefreepools. Here is the actual link and solution from JGUY:
http://www.troublefreepool.com/fixed-zodiac-mx8-doing-circles-now-runs-fine-t51590.html
This is a great pool forum (although I have a lifetime ban -- long story). It seems to solve the problem.
The next problem is if the MX8 is not reversing. That is solved by replacing one or both of the Direction Control Devices. Here I replaced both but sometimes only one is bad. They are marked Side A and Side B so make sure you order the correct one if you are just getting one. I would suggest replacing both.
Last I show you what to do if the pool has good suction but the MX8 is moving very slowly. You will need to replace the Engine Assembly and possibly the two bearings.
Like the Zodiac Polaris cleaners I noticed there are several bearings in the MX8 cleaner. I would say after maybe five or six years all the bearings will need to be replaced to keep the cleaner working fine. The good thing about the MX8 is that the parts are easy to change and relatively inexpensive. You can keep this thing going for several years just by changing parts. Not a bad thing but I guess not a good thing either ;)
Related Videos:
Zodiac® MX8™ Elite Automatic Suction Side Pool Cleaner: https://youtu.be/hUI4WkJJNO8
Zodiac MX8 Cyclonic Scrubbing Kit - Retrofit Kit for your Zodiac MX8 Cleaner: https://youtu.be/oxuddMxbxoE
How to replace the Track in a Zodiac MX8: http://youtu.be/kEx9F_M-0EM
Zodiac MX8 Automatic cleaner review: http://youtu.be/m3eGYydkurc
How to Connect a Leaf Canister to a Zodiac MX8, T3, T5, X7 Cleaner: http://youtu.be/sJyvhD04fhw
Leaf Canister Adapter part: Baracuda MX8 Cleaner Leaf Catcher Hose Adaptor X77094
-seen at the testing stage in the video.
WEBSITE: http://www.swimmingpoollearning.com/
YouTube Video Index -- A list of all of my videos: http://poolmandave.blogspot.com/2014/03/swimming-pool-tips-reviews-how-to-video.html
Mrdgvb1 Social Media Links:
Google +: https://plus.google.com/b/107735343574734346096/
Blogger: http://poolmandave.blogspot.com/
Facebook: https://www.facebook.com/pages/Youtube-Mrdgvb1/381257741926763?ref=hl
Видео Zodiac MX8 Getting Stuck, Moving Slowly or Going in Small Circles канала Swimming Pool Tips, Reviews & How To - SPL
I was going to make it into three separate videos but I figured if you have an MX8 you will need to do both or all three repairs eventually so you might as well see it all at once.
Here are the parts you will need for this:
(1) Mx 8 Engine Assembly R0524900
(1) Mx 8 Direction Control Device Side B R0524800
(1) Mx 8 Direction Control Device Side A R0524700
(2) Bearing (Wheel & Engine) R0527000
The great thing about the MX8 is that it an easy cleaner to work on. It is pretty well engineered but it is a gear cleaner so the parts that drive it will wear out.
The first thing I show is if the cleaner is moving in small circles in the pool. I took this solution from Troublefreepools. Here is the actual link and solution from JGUY:
http://www.troublefreepool.com/fixed-zodiac-mx8-doing-circles-now-runs-fine-t51590.html
This is a great pool forum (although I have a lifetime ban -- long story). It seems to solve the problem.
The next problem is if the MX8 is not reversing. That is solved by replacing one or both of the Direction Control Devices. Here I replaced both but sometimes only one is bad. They are marked Side A and Side B so make sure you order the correct one if you are just getting one. I would suggest replacing both.
Last I show you what to do if the pool has good suction but the MX8 is moving very slowly. You will need to replace the Engine Assembly and possibly the two bearings.
Like the Zodiac Polaris cleaners I noticed there are several bearings in the MX8 cleaner. I would say after maybe five or six years all the bearings will need to be replaced to keep the cleaner working fine. The good thing about the MX8 is that the parts are easy to change and relatively inexpensive. You can keep this thing going for several years just by changing parts. Not a bad thing but I guess not a good thing either ;)
Related Videos:
Zodiac® MX8™ Elite Automatic Suction Side Pool Cleaner: https://youtu.be/hUI4WkJJNO8
Zodiac MX8 Cyclonic Scrubbing Kit - Retrofit Kit for your Zodiac MX8 Cleaner: https://youtu.be/oxuddMxbxoE
How to replace the Track in a Zodiac MX8: http://youtu.be/kEx9F_M-0EM
Zodiac MX8 Automatic cleaner review: http://youtu.be/m3eGYydkurc
How to Connect a Leaf Canister to a Zodiac MX8, T3, T5, X7 Cleaner: http://youtu.be/sJyvhD04fhw
Leaf Canister Adapter part: Baracuda MX8 Cleaner Leaf Catcher Hose Adaptor X77094
-seen at the testing stage in the video.
WEBSITE: http://www.swimmingpoollearning.com/
YouTube Video Index -- A list of all of my videos: http://poolmandave.blogspot.com/2014/03/swimming-pool-tips-reviews-how-to-video.html
Mrdgvb1 Social Media Links:
Google +: https://plus.google.com/b/107735343574734346096/
Blogger: http://poolmandave.blogspot.com/
Facebook: https://www.facebook.com/pages/Youtube-Mrdgvb1/381257741926763?ref=hl
Видео Zodiac MX8 Getting Stuck, Moving Slowly or Going in Small Circles канала Swimming Pool Tips, Reviews & How To - SPL
Показать
Комментарии отсутствуют
Информация о видео
29 ноября 2013 г. 10:40:56
00:11:32
Другие видео канала
Zodiac Baracuda MX8 My ReviewZodiac MX8 Pool CleanerHow To Install A Suction Pool CleanerZodiac Baracuda MX8 Tune Up kit - How to Repair an MX8 pool cleanerThe Ultimate MX8 ELITE & MX8 Rebuild Video: Changing All of the Wear Parts! (AX10 ACTIV & AX10)ZODIAC MX8™ ELITE Review: Extreme Wall Climbing Ability, Huge Cleaning Path!Tip 2 - How to improve your pool pump suctionThe Ultimate Zodiac MX6 & MX6 Elite Repair VideoZodiac MX6 Not Turning: Replacing the Direction Control Device - Side AZodiac MX6 Not Moving Part 2: Replacing the Engine Assembly R0524900Installing A Zodiac MX6 or MX8 Automatic Pool cleanerZodiac MX6/MX8 Flow Regulator Valve - How it worksZodiac MX6 Not Moving Part 1: Changing the Track Tires #R0526100Set up Zodiac hydraulic cleaners (Mx6 to Mx9)How to fix common problems with pool cleanersZodiac Pool Guru Andy Dawson explains the MX8Zodiac MX8 Factory Tune Up Kit - How To!Zodiac® MX8™ Elite Installation (MX8 and MX6)Zodiak Barracuda MX8 Elite Review from a Pool OwnerZodiac MX8 Installation Instructions