Water Methanol Injection Kit Install

We install the Snow Performance Stage 1 Water Methanol Injection kit into the MK5 VW Jetta Wolfsburg 2.0T TSI and take it out for a rip. The pump sprays a recommended 50/50 mix of distilled water and methanol into the engine right before the throttle body. It uses an adjustable boost switch to activate the pump at a desired boost pressure. This cools down the boost air temperature, and exhaust gas temperature. It also significantly increases the octane of the fuel, which reduces the potential for detonation. This is perfect for any turbocharged engine making more than stock power!

*** Although the brass nut works when mounting the nozzle into the boost tube, as was pointed out in the comments, there is a possibility that it may come loose and cause engine damage. To prevent this it's recommended to use these for piece of mind :) https://www.snowperformance.net/Snow-Performance-Nozzle-Mount-Adapter-p/40110.htm

*** Check out our other videos, and be sure to SUBSCRIBE and hit the NOTIFICATION BELL to know when we upload new videos!

*** Follow us on INSTAGRAM @wannabe_tuners for more frequent updates!

*** Check out our MERCH STORE here:
https://teespring.com/stores/wannabetuners

As always, THANKS FOR TUNING!

Mods in this video:
1. Eurodyne Stage 2 Software
2. Snow Performance Stage 1 WMI
3. Forge Diverter Valve (Blue Spring)
4. One Step Colder NGK Spark Plugs
5. South Bend Stage 2 DD Clutch
6. Spulen Dogbone Mount Insert
7. 3" Electronic Exhaust Cutout
8. 42DD 3" Catted Downpipe
9. Rear Resonator Deleted
10. Neuspeed P-Flo Intake
11. R8 Coil Packs
12. 2 Stickers

Видео Water Methanol Injection Kit Install канала Wannabe Tuners