Chimney Flashing Installation on a Standing Seam Metal Roof

How do you properly install a chimney flashing using a pre-manufactured curb?

**********************************

Any penetration in a metal roof offers the potential for leaks if it is not flashed properly, and a chimney is no different. Today on The Metal Roofing Channel, Matt Lane from Metal Construction Solutions and Installations shows how to flash a chimney on a standing seam metal roof using a pre-manufactured curb. The curb is made of welded aluminum and gives superior lifetime protection, and is installed onto the chimney by way of a reglet flashing.

Check out this piece of content for more information:

How to Install a Pre-Manufactured Curb: http://bit.ly/pre-manufactured-curb-installation-video

Check out Matt Lane's company, Metal Construction Solutions & Installations, here: http://bit.ly/metal-construction-ohio

Please note the installation details and methods shown in this video are for reference only. Sheffield Metals recommends following their published installation details or for WTW projects following the required details issued and marked approved for that specific project.

**********************************

FOLLOW THE SHEFFIELD METALS TEAM
►https://www.linkedin.com/company/sheffield-metals-international/
►https://www.facebook.com/sheffieldmetals/

Visit Our Website: https://hubs.ly/H0bFCn60
Subscribe To Our Blog: https://hubs.ly/H0bFYvX0

Видео Chimney Flashing Installation on a Standing Seam Metal Roof канала The Metal Roofing Channel