Simple Miter Saw Bench

I've been wanting a miter saw bench for a long time. The basic idea is that the bench-top is flush with the bed of the saw. That way, whatever I'm cutting is fully supported by the bench before, during, and after the cut.

I wanted to keep this project simple and cost effective, so the entire bench is built of construction-grade 2"x4" pine. The top is two layers, 3/4" MDF and 3/4" melamine. I didn't want to drill through the melamine and screw it down ... or glue it ... instead, I cut a simple edge trim from pine and the melamine drops in.

Evolution RAGE 3 Miter Saw:
https://amzn.to/2OwMOli

Thanks for checking in! If you have any questions, don't hesitate to ask!

ON THE WEB:
http://thedailyshed.com
http://facebook.com/thedailyshed
twitter: @cheveedodd
instagram: cheveedodd

MAILING ADDRESS:
Chevee Dodd
PO BOX 8023
FAIRMONT, WV 26555

MY GEAR:
http://thedailyshed.com/about

Видео Simple Miter Saw Bench канала Chevee Dodd