H-King ARF Savage Bobber Lightweight STOL Airplane (1000mm) - Flight Review
Stuart goes over the new H-King ARF Savage Bobber Lightweight STOL Airplane (1000mm) in our latest product video. Available now!
The H-King Savage Bobber is an easy-to-assemble and fly, small semi-scale model of this popular STOL lightweight aircraft. It is supplied as an ARF (Almost Ready to Fly), it requires assembling, and your own choice of motor, ESC, servos, receiver, and LiPo battery adding.
Get the H-King ARF Savage Bobber Lightweight STOL Airplane (1000mm): https://bit.ly/3e3BkGz
The full-size Savage Bobber was devised by the Zlin Aviation Company. The Bobber as in the motorcycle world means that it is a stripped-down, customized version of an original. The Savage Bobber is a stripped-down, customized version of its older brother the Savage Classic. It is lighter, more maneuverable, has a slightly narrower fuselage, and the absence of covering to the rear of the fuselage greatly improves crosswind handling.
The H-King version of the Savage Bobber has been designed in the same spirit, but unlike previous versions of this model that have been on the market, this one has been rigorously test flown during development. Our pilots have spent many hours flying and tweaking the setup, including changing the flap hinges to hinge at the bottom to allow for a full 90° deflection. Its slow flight characteristics have subsequently been improved, control is retained down to quite low speeds, and steep landing approaches are achievable. The big tundra-style wheels and robust landing gear allow the Savage Bobber to fly from most types of terrain. The Savage Bobber is a fun plane that is easy and amazing to fly and one of the lightest in the 1000mm wingspan category (approx 650g depending on set-up).
The model is hand-crafted from balsa and has a crystal clear plastic windshield, carbon wing joiner, carbon wing struts, and factory-applied covering film with colorful decals. Also supplied is a vacuum-formed plastic cowl, a comprehensive hardware pack, and as mentioned before, it is supplied with scale wheels with large, oversized tundra-type tires.
Although small in size it is large in stature, it will definitely stand out from the crowd at the local flying field. The large, open-sided cockpit lends itself nicely for some added scale detail and possibly a full-length scale pilot! So why not add the H-King Savage Bobber to your model hangar today and have a lot of fun, flying in parks, and those smaller places where you normally are unable to fly with the bigger models.
Features:
• Rigorously test flown during development to ensure an excellent, easy-flying airplane
• Small and lightweight, perfect for parks and small flying areas
• Bottom Hinged Flaps to allow for full 90° Movement
• Factory-applied covering and colorful decals
• Scale wheels with oversized tundra-type tires
• Carbon wing joiner and wing struts
• Vacuum formed cowl and comprehensive hardware pack
Don't forget to like, share, subscribe, and hit the notification bell for regular HobbyKing videos
Enjoy, stay safe, and let's keep growing the community:
• Sign-up for Email Updates: https://bit.ly/2YahBd5
• Facebook - https://www.facebook.com/HobbyKing
• Twitter - https://twitter.com/HobbyKingLive
• Instagram - https://www.instagram.com/hobbyking/
• Branded Merch - https://bit.ly/3qYtU9n
#hking #savagebobber #hobbyking #flightreview #productoverview #rcplanerview #rcaircraft #hobbyking #arf #pnf #flightoverview #rcplane #rcairplane #rcaeroplane
Видео H-King ARF Savage Bobber Lightweight STOL Airplane (1000mm) - Flight Review канала HobbyKing
The H-King Savage Bobber is an easy-to-assemble and fly, small semi-scale model of this popular STOL lightweight aircraft. It is supplied as an ARF (Almost Ready to Fly), it requires assembling, and your own choice of motor, ESC, servos, receiver, and LiPo battery adding.
Get the H-King ARF Savage Bobber Lightweight STOL Airplane (1000mm): https://bit.ly/3e3BkGz
The full-size Savage Bobber was devised by the Zlin Aviation Company. The Bobber as in the motorcycle world means that it is a stripped-down, customized version of an original. The Savage Bobber is a stripped-down, customized version of its older brother the Savage Classic. It is lighter, more maneuverable, has a slightly narrower fuselage, and the absence of covering to the rear of the fuselage greatly improves crosswind handling.
The H-King version of the Savage Bobber has been designed in the same spirit, but unlike previous versions of this model that have been on the market, this one has been rigorously test flown during development. Our pilots have spent many hours flying and tweaking the setup, including changing the flap hinges to hinge at the bottom to allow for a full 90° deflection. Its slow flight characteristics have subsequently been improved, control is retained down to quite low speeds, and steep landing approaches are achievable. The big tundra-style wheels and robust landing gear allow the Savage Bobber to fly from most types of terrain. The Savage Bobber is a fun plane that is easy and amazing to fly and one of the lightest in the 1000mm wingspan category (approx 650g depending on set-up).
The model is hand-crafted from balsa and has a crystal clear plastic windshield, carbon wing joiner, carbon wing struts, and factory-applied covering film with colorful decals. Also supplied is a vacuum-formed plastic cowl, a comprehensive hardware pack, and as mentioned before, it is supplied with scale wheels with large, oversized tundra-type tires.
Although small in size it is large in stature, it will definitely stand out from the crowd at the local flying field. The large, open-sided cockpit lends itself nicely for some added scale detail and possibly a full-length scale pilot! So why not add the H-King Savage Bobber to your model hangar today and have a lot of fun, flying in parks, and those smaller places where you normally are unable to fly with the bigger models.
Features:
• Rigorously test flown during development to ensure an excellent, easy-flying airplane
• Small and lightweight, perfect for parks and small flying areas
• Bottom Hinged Flaps to allow for full 90° Movement
• Factory-applied covering and colorful decals
• Scale wheels with oversized tundra-type tires
• Carbon wing joiner and wing struts
• Vacuum formed cowl and comprehensive hardware pack
Don't forget to like, share, subscribe, and hit the notification bell for regular HobbyKing videos
Enjoy, stay safe, and let's keep growing the community:
• Sign-up for Email Updates: https://bit.ly/2YahBd5
• Facebook - https://www.facebook.com/HobbyKing
• Twitter - https://twitter.com/HobbyKingLive
• Instagram - https://www.instagram.com/hobbyking/
• Branded Merch - https://bit.ly/3qYtU9n
#hking #savagebobber #hobbyking #flightreview #productoverview #rcplanerview #rcaircraft #hobbyking #arf #pnf #flightoverview #rcplane #rcairplane #rcaeroplane
Видео H-King ARF Savage Bobber Lightweight STOL Airplane (1000mm) - Flight Review канала HobbyKing
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Durafly Auto-G2 V2 Trailer.Flight Demo - Avios Spitfire MkVb Super Scale 1450mm PNF, USAAF Desert Scheme.Flight Demo - Durafly EFX Racer & EFXTRA, PNF Racers.Durafly (PNF) Supermarine Spitfire Mk2a WWII Fighter EPO 1100mm - Community Content - Model AV8RFlight Demo - Durafly D.H.100 Vampire V2, 70mm EDF Jet.Flight Demo - Durafly Naval Aviation Centennial Edition T-28 Trojan, 1100mm PNFFlight Demo - Durafly (PNF) Goblin Racer 820mm EPOMod Tech Monday - Durafly SlowPoke 1200mm (47.2) PNF ImprovementsFlight Demo - Durafly SlowPoke 1200mm PNF on 4S!HobbyKing's Tips Bench Tuesday - Checking Motors & ESCs with a Servo TesterDurafly (PNF) Me-163 V2 "White 10" WWII Interceptor Fighter EPO 950mm - Flight ReviewFlight Demo - Volantex 759-1 ASW28 V2Flight Demo - H-King Yak-11 1450mm Warbird Sunset FlightDurafly (PNF) Supermarine Spitfire Mk2a WWII fighter EPO 1100mm - Flight ReviewH-King (PNF) F-16 Fighting Falcon and F-18 Super Hornet 50mm 12 Blade EDF (4S) EPO - Flight ReviewDurafly (PNF) Gloster Gladiator Mk1 Biplane Fighter EPO 1100mm (43") - Flight ReviewH-King (PNF) Reno Aces FG-1 Corsair "Lucky Gallon" EPO 990mm (39") - Flight ReviewDurafly Night Tundra (PNF) STOL/Sports Model EPO 1300mm (51") - Flight ReviewAvios (PNF) C-130 V2 Scale Turboprop w/Retracts & Flaps EPO (1600mm) - Flight ReviewDurafly Prime Tundra PT1200 (PNF/RTF) Trainer-Sports Model (EPO) 1200mm (47.2") - Flight Review