DIY CNC +ESTL CAM trochoidal path + HSMAdvisor + DDSCV1.1 motion controller

Firts test of HSM toolpaths using cheap board and Cam on my DIY CNC / not so cheap/. More than happy. 19mm bit, 11mm depth pocket then full depth 19mm profile . Both at 16000mm/min feed 5.8% or 27.8% degrees HSM width of cut .

Видео DIY CNC +ESTL CAM trochoidal path + HSMAdvisor + DDSCV1.1 motion controller канала Boyan Silyavski