Epson L3110 - How to fix a "paper jam error" even when there is no more paper inside
In this video, I showed you how I fixed a "paper jam error" on Epson L3110 even when the crumpled paper was already removed from the inside.
The problem was found at the horizontal drive encoder. During power up, there was a loud sound of banging cartridge moving from left to right. That indicates that there is a problem in homing the cartridge. I just learned that the encoder ribbon was derailed from the sensor. Took me a while to fix it but it's worth learning and also satisfying to see it work again.
Видео Epson L3110 - How to fix a "paper jam error" even when there is no more paper inside канала gabs Ramos Hobbyist page
The problem was found at the horizontal drive encoder. During power up, there was a loud sound of banging cartridge moving from left to right. That indicates that there is a problem in homing the cartridge. I just learned that the encoder ribbon was derailed from the sensor. Took me a while to fix it but it's worth learning and also satisfying to see it work again.
Видео Epson L3110 - How to fix a "paper jam error" even when there is no more paper inside канала gabs Ramos Hobbyist page
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Simple Energy Monitor using PZEM-004T, Arduino, and Excel Data StreamerBackup Water System Gravity FallEpson L120 Paper Jam ProblemHow to install an extra Tail Light for Toyota Wigo Gen 2How to install the Battery Cable for off grid solar setup.4 March 2023Simple coding / debug walkthrough : Neo 6M GPS / Arduino / SoftwareSerial20 February 202318 February 2023Using OLED I2C 128x64 and ArduinoUsing Ov7670 and ArduinoControlling the IP camera stepper motor using ArduinoInstalling a Solar Light 45W IP6727 January 202325 January 2023How to Install a GPS Tracker on Toyota Wigo or any favorite CarArduino Fingerprint Security System 2.0 VB and Excel IntegrationArduino Fingerprint Security System using R307SIM808 GPS/GSM AT Commands Via ARDUINO Serial MonitorArduino Radar (Sonar) What if I mounted it in a WRONG way?