How to Set 3 Position Switches on RadioLink RC8X?

The four DT buttons of RC8X, including DT1, DT2, DT3, and DT4 can be used as 3 position switches by setting. There are 3 steps to set it:
1．Select any DT button for the channel to be set in the "Channel Setting" menu.
2．Enter "Trim/Dial select" menu, and set the step of the corresponding DT button to 100, so that every time the DT button is toggled, the travel amount will go directly to 100. You can also set different values according to your needs (Note: Trim step defaults to 2).
3．After setting, the DT button can be used as a 3 position switch. Return to the home page and toggle the corresponding DT button to check the servo display.

Take channel 4 and DT2 as an example. That is to say, if you want DT2 to work as a position switch to control channel 4, Here is the setting.
1.Enter Basic menu--channel setting, select DT2 for channel 4.
2.Enter Basic menu-Trim/Dial select. The step of DT2 defaults to 2. Change it to 100, so that every time DT2 is toggled, the travel amount of channel 4 will go directly to 100. You can also set different values according to your needs
Press power button to return to home page. Toggle DT2, we can see the travel amount is 100, so it works as a 3 position switch now.

For more details of RadioLink RC8X:
https://www.radiolink.com/rc8x

Purchase link of RadioLink RC8X:
https://www.aliexpress.us/item/1005004743815930.html

You can send mails to after_service@radiolink.com.cn if you have any questions during using our products.

#fpvracing #fpv#rctransmitter #radiolink #rc8x#trending#challenge

Видео How to Set 3 Position Switches on RadioLink RC8X? канала RadioLink