Oz-Post model T4-600
Oz-Post model T4-600 is designed for standard 4x4 wood posts. This post is ideal for fencing and sign posts that are being installed in very firm, hard terrain. This model is also great for shorter fences with sizes ranging from 24-60.
INSTALLATION:
Option 1 Jackhammer: use the Oz-Hammer model OH-01 and Hammer-Spacer model HSP-T4. Jackhammers are easy to operate and available to rent at all rental centers in the country. Oz-Post recommends an electric or gas powered jackhammer. Pneumatic jackhammers are also ok but they are often much heavier and unnecessary.
Option 2 Sledgehammer: cut scrap piece of wood about 8" and insert into the top sleeve. Strike the wood with the head of the hammer to drive the post into the ground.
HINT: Be sure that the scrap piece is a loose fit so that it is not difficult to remove after the post is installed.
Видео Oz-Post model T4-600 канала FenceTraders
INSTALLATION:
Option 1 Jackhammer: use the Oz-Hammer model OH-01 and Hammer-Spacer model HSP-T4. Jackhammers are easy to operate and available to rent at all rental centers in the country. Oz-Post recommends an electric or gas powered jackhammer. Pneumatic jackhammers are also ok but they are often much heavier and unnecessary.
Option 2 Sledgehammer: cut scrap piece of wood about 8" and insert into the top sleeve. Strike the wood with the head of the hammer to drive the post into the ground.
HINT: Be sure that the scrap piece is a loose fit so that it is not difficult to remove after the post is installed.
Видео Oz-Post model T4-600 канала FenceTraders
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Oz-Post - Tips and Tricks to InstallationHow to install a METPOST/Fence Spike like a pro!How to build a deck with Oz Deck - Part 2Oz-Post T4-850-1/1OZ-POST® WOOD POST ANCHORSWhich fence post driver is the best? | RediDriver Commercial DOT vs Rhino GPD-45Install a METPOST | FENCE SPIKE | Like a Professional FencerOz-Post Customer Review: Pt. 1OZ-POST® WOOD POST ANCHORSHow to build a deck with Oz Post - Part 1Fence Post Anchor Installation INTRO - DIY Fence (Fence Post Anchors Part 1 of 3)How to Turn a Chain Link Fence Into a Privacy FenceHomemade Hydraulic Post Driver For Compact TractorBuilding a 40' Privacy Fence using Dog-Eared Pine PicketsRepair "air hammer" "DIY"Fahrradgarage aus HOLZ selber bauen | Fahrrad CarportInstalling A No Dig Privacy Fence Crazy Fast!Building a Backyard Pavilion Part 1Treating Wood Fence Posts - The old Timers WayHow To Build A 6' Wooden Privacy Fence