Hyperloop Shell: Egg-crate Assembly and Strip-planking (Part 3)
This video shows the assembly of the mold egg-crate structure from the CNC-cut parts for the MIT Hyperloop 2 shell tooling. After the egg-crate assembly, I rip some (lots of!) poplar strips and strip-plank the mold dry. Finally the strips are glued together with thickened epoxy and given an initial fairing job with a grinder and some 36 grit sandpaper.
For more details about this project check out the article at Explore Composites:
https://explorecomposites.com/articles/tooling/mithyperloop-tooling/
Видео Hyperloop Shell: Egg-crate Assembly and Strip-planking (Part 3) канала Explore Composites
For more details about this project check out the article at Explore Composites:
https://explorecomposites.com/articles/tooling/mithyperloop-tooling/
Видео Hyperloop Shell: Egg-crate Assembly and Strip-planking (Part 3) канала Explore Composites
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Hot Mold, Cold Resin: Vacuum Infusion TestLaminate Sample #42: Infused Boston Materials Supercomp with Z-axis FiberLaminate Sample #19: Infused E-glass / Epoxy with Caul PlateLaminate Sample #43a: Vacuum Bagged Stitched Mat with Kerdyn PET CoreHyperloop Shell: Fairing the Mold (Part 6)Hyperloop Shell: CNC Machining MDF for the Mold (Part 2)Laminate Sample #46: Birch Ply on Nomex with Dynel SheathingMold Release Films for Composites ToolingLaminate Sample #18: Vacuum Bagged E-glass / Epoxy with Thin Foam CoreLaminate Sample #40: Infused Carbon Grid with Light E-glass ClothLaminate Sample #17: Thin Open-Molded E-Glass / EpoxyLaminate Sample #33: Vacuum Bagged Mahogany Veneer with Balsa CoreVacuum Bagging MDF Blocks for CNC MachiningLaminate Sample #12: Light Prepreg Carbon on Nomex CoreHyperloop Shell: 'Glassing the Mold (Part 5)Laminate Sample #4: Prepreg Carbon Plate with Quasi-Isotropic Balanced and Symmetrical LaminateLaminate Sample #35: Vacuum Bagged E-glass / Epoxy with Plastic Honeycomb CoreLaminate Sample #21: Infused Flax / Epoxy with Bcomp powerRibsLaminate Sample #47: Infused Recycled Carbon PlateHyperloop Shell: Mold Assembly (Part 4)