Build Video of Vortex-RC EPP 3D Profile RC Plane for 3D Aerobatics
The EPP 3D Profile RC Plane by Vortex RC is an extremely lightweight RC plane, with an allout weight of less than 300 grams.
Ideal for learning to hover and do 3D Manouevers.
Available at http://www.vortex-rc.com/product/epp-profile-3d-rc-plane-740mm/
Видео Build Video of Vortex-RC EPP 3D Profile RC Plane for 3D Aerobatics канала Vortex-RC
Ideal for learning to hover and do 3D Manouevers.
Available at http://www.vortex-rc.com/product/epp-profile-3d-rc-plane-740mm/
Видео Build Video of Vortex-RC EPP 3D Profile RC Plane for 3D Aerobatics канала Vortex-RC
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
VT Allrounder Fuselage Build Series: 5. Completing the Fuselage - Installaing Tail and decals
VT Speedster PRO - Launch Technique
3D Printer: 3. The first 3D Print
VT Speedter Build 6 Finishing the build and tests
VT-AllRounder Intermediate Wing Build: 2. Cutting Beveling and Hinging Ailerons
VT-AllRounder Intermediate Wing Build : 1. Laminating the Wings
VT-AllRounder Intermediate Wing Build: 5. Installing the foam adaptors and decals
VT Speedster PRO Joining the Wing panels with the blunt center bay
Tuffstar - Easy to fly EPP RC Trainer by Tuffbirds.in
Tuffbirds Micro Bee Kit Overview and unboxing
Vortex-RC| TuffBirds Chiquita-100| Build Part-9 Cutting Motor Mount bay
VT-AllRounder Fuselage Build Series: 4. Hinging the Elevator and Rudder
Brief introduction to our upcoming 1200mm EPP flying wing..
Interceptor 160 kit Build Part 1 - Spar Installation
Vortex-RC|Brief intro to the electronics we have used in our Interceptor 100.
Mapper V4 Intro |Vortex-Rc
VT-AllRounder Expert Wing Build : 2. Cutting the ailerons and installing the servos
VT Allrounder Expert Wing Build: 1. Laminating the Wing panels
Mapper V4 Build Instructions |Vortex-Rc
Vortex-RC | Tuffbirds Chiquita-100 |Build Part-4 -Install the spars
VT-AllRounder Trainer Wing Build : 1. Laminating the Wing panels