Nikola Tesla's 1921 Turbine / Pump / Rotary Engine / Compressor Rotor
Nikola Tesla had approximately 12 years research & development between his 1909 and 1921 rotor designs.
Tesla made a very rare patent British Patent 186,082 and his final design was described in great depth, detailing every suitable manufacturing method that was possible at the time.
Here is the original from the British Patent Office:
https://www.dropbox.com/s/mgw5fzgwyrz9d16/B186082.PDF?dl=0
Here the version I cleaned up:
https://www.dropbox.com/s/ov3xpp4pmm1vxec/Nikola%20Tesla%20-%20B186082.pdf?dl=0
Rotor Specification:
12 x 0.8mm x 126mm Hardened Stainless Steel 420HTP Precision Ground Discs
1 x 0.8mm x 126mm Hardened Stainless Steel 420HTP Precision Ground Solid Centre Disc
2 x 4mm x 126mm Hardened Stainless Steel 420HTP Precision Ground Tapered End Plates
Discs measured to have 1 micron parallelism.
Axle Specification:
1 x Aerospace Grade 5 Titanium Precision Ground Axle
1 x Aerospace Grade 5 Titanium Precision Ground Pressed End Washer
2 x Aerospace Grade 5 Titanium Precision Ground Keys
2 x Aerospace Grade 5 Titanium Spark Eroded Key Ways
To finish this design off properly you would titanium weld the pressed end washer to the shaft.
We have used hardened and tempered surgical stainless steel 420HTP.
This is superior to the Nickel Silver C770 aka "German Silver" Nikola Tesla used for his rotor discs.
Surgical steel has a high tensile and yield strength and because it has been hardened and tempered we do not need the rivets shown in the diagram, which are there to prevent the discs warping.
This rotor is built to higher engineering standards than Nikola Tesla could have achieved back in 1921.
The design is symmetrical because it helps to align the centre of balance with the centre of symmetry for an optimum dynamic balance.
The only other countries it appears this patent was approved in are:
Belgium Patent 302,317
France Patent 541,142.
Here is the full granted patent list of all of Tesla's patents.
https://www.dropbox.com/s/ho8dx2vqaeawuje/Granted%20Patent%20List.pdf?dl=0
#TeslaTurbine
#TeslaPump
#TeslaEngine
#TeslaCompressor
Видео Nikola Tesla's 1921 Turbine / Pump / Rotary Engine / Compressor Rotor канала Nikola Tesla Research & Development Centre
Tesla made a very rare patent British Patent 186,082 and his final design was described in great depth, detailing every suitable manufacturing method that was possible at the time.
Here is the original from the British Patent Office:
https://www.dropbox.com/s/mgw5fzgwyrz9d16/B186082.PDF?dl=0
Here the version I cleaned up:
https://www.dropbox.com/s/ov3xpp4pmm1vxec/Nikola%20Tesla%20-%20B186082.pdf?dl=0
Rotor Specification:
12 x 0.8mm x 126mm Hardened Stainless Steel 420HTP Precision Ground Discs
1 x 0.8mm x 126mm Hardened Stainless Steel 420HTP Precision Ground Solid Centre Disc
2 x 4mm x 126mm Hardened Stainless Steel 420HTP Precision Ground Tapered End Plates
Discs measured to have 1 micron parallelism.
Axle Specification:
1 x Aerospace Grade 5 Titanium Precision Ground Axle
1 x Aerospace Grade 5 Titanium Precision Ground Pressed End Washer
2 x Aerospace Grade 5 Titanium Precision Ground Keys
2 x Aerospace Grade 5 Titanium Spark Eroded Key Ways
To finish this design off properly you would titanium weld the pressed end washer to the shaft.
We have used hardened and tempered surgical stainless steel 420HTP.
This is superior to the Nickel Silver C770 aka "German Silver" Nikola Tesla used for his rotor discs.
Surgical steel has a high tensile and yield strength and because it has been hardened and tempered we do not need the rivets shown in the diagram, which are there to prevent the discs warping.
This rotor is built to higher engineering standards than Nikola Tesla could have achieved back in 1921.
The design is symmetrical because it helps to align the centre of balance with the centre of symmetry for an optimum dynamic balance.
The only other countries it appears this patent was approved in are:
Belgium Patent 302,317
France Patent 541,142.
Here is the full granted patent list of all of Tesla's patents.
https://www.dropbox.com/s/ho8dx2vqaeawuje/Granted%20Patent%20List.pdf?dl=0
#TeslaTurbine
#TeslaPump
#TeslaEngine
#TeslaCompressor
Видео Nikola Tesla's 1921 Turbine / Pump / Rotary Engine / Compressor Rotor канала Nikola Tesla Research & Development Centre
Показать
Комментарии отсутствуют
Информация о видео
22 января 2020 г. 9:04:32
00:05:40
Другие видео канала
TESLA TURBINE | What happened?Nikola Tesla's TurbineNew "Tesla Turbine" Design, Full Test And Build. NEW Design Starts Under Load.3d Printed Compressed Air TurbineTesla Turbine | The interesting physics behind itУникальный роторный двигатель Николы Тесла - самый простой двигатель в мире! Tesla gas rotary engineTESLA TURBINE TESTINGNikola Tesla's Pulse Detonation Engine - CDI Spark vs Plasma Spark Ignition16 Cylinder Gas Powered Stirling EngineTesla Valve 3D PrintedTwo Stage Tesla Turbine Load Testing, Powering 1000w MotorThe Tesla Turbine & How it worksHow Tesla Turbine Works??Tesla's Secret finally understood (Gerard Morin)Nikola Tesla's Pulse Detonation Engine (PDE) - Detonation ChamberBases2020 - Paul Townley - Tesla Cold Steam Power - Part 1Live 2 Plane BalanceJay Leno's Steam CarsNikola Tesla's Pulse Detonation Engine - Build ComponentsMicro Tesla Turbine Mk2 | Part 1 | The Rotor