Sandisk usb does not work | here is how to fix it
for data recovery call: 855.366.4232
or request your service here: http://www.hddrecovery.ca/contact-us/
music: https://www.youtube.com/user/TheR4C2010
this video: https://youtu.be/2YZ0LBhFCZY
This poor Sandisk USB does not work. In this video, I will show you how you can recover data from a Sandisk flash drive with the damaged controller. First, inspect all headers and pads on the connector (that is the most common issue for Sandisk USB flash drives). In this case the connector and headers seemed to be fine, but we will replace the connector anyways to rule out a simple issue. Further visual inspection revealed, that a resistor on 5v power rail was burnt. An identical donor flash drive was used for parts in this case. After replacing a burnt resistor, Sandisk USB flash drive still did not want to work. Powersurge must have damaged the controller, and luckily the donor was so close that the controllers matched and clients flash drive was once again working after the transplant. In order to ensure that controllers are compatible, USB flash drives have to be identical size, PCB has to match, and part number on the controller has to be the same. I hope this video and article help you get data from your failed Sandisk usb flash drive. If what you see in the video is more than you can handle, then feel free to reach us for help http://www.hddrecovery.ca/contact-us/
and send your drive boxed with bubble wrap to this address:
HDD Recovery Services
391 Bank St, Suite 201
Ottawa, ON
K2P 1Y3
Canada
my gear for soldering:
Microscope: https://amzn.to/2rqWcwr
Multimeter: http://amzn.to/2EHKAxO
Microscope camera: https://amzn.to/2Rb5cUq
Capture card recording device: http://amzn.to/2mMTz7t
Soldering iron station: http://amzn.to/2mMYp4v
Microsoldering iron: http://amzn.to/2mMTVuP
Hot air station: https://amzn.to/2K7Mztk
Infrared preheater: http://amzn.to/2mbMlXo
Flux: http://amzn.to/2mXJd1b
Wick: http://amzn.to/2mNr0Xh
Solder: http://amzn.to/2mtyC0a
Gloves: http://amzn.to/2mbHWDI
Fume Extractor (mine is no longer available but this is the new version of the same unit) : http://amzn.to/2mNCmL7
Gear for filming:
small camera: http://amzn.to/2mNw51T
big camera: http://amzn.to/2Ficg9o
Lens on big camera:http://amzn.to/2Cx3fGw
Видео Sandisk usb does not work | here is how to fix it канала HDD Recovery Services
or request your service here: http://www.hddrecovery.ca/contact-us/
music: https://www.youtube.com/user/TheR4C2010
this video: https://youtu.be/2YZ0LBhFCZY
This poor Sandisk USB does not work. In this video, I will show you how you can recover data from a Sandisk flash drive with the damaged controller. First, inspect all headers and pads on the connector (that is the most common issue for Sandisk USB flash drives). In this case the connector and headers seemed to be fine, but we will replace the connector anyways to rule out a simple issue. Further visual inspection revealed, that a resistor on 5v power rail was burnt. An identical donor flash drive was used for parts in this case. After replacing a burnt resistor, Sandisk USB flash drive still did not want to work. Powersurge must have damaged the controller, and luckily the donor was so close that the controllers matched and clients flash drive was once again working after the transplant. In order to ensure that controllers are compatible, USB flash drives have to be identical size, PCB has to match, and part number on the controller has to be the same. I hope this video and article help you get data from your failed Sandisk usb flash drive. If what you see in the video is more than you can handle, then feel free to reach us for help http://www.hddrecovery.ca/contact-us/
and send your drive boxed with bubble wrap to this address:
HDD Recovery Services
391 Bank St, Suite 201
Ottawa, ON
K2P 1Y3
Canada
my gear for soldering:
Microscope: https://amzn.to/2rqWcwr
Multimeter: http://amzn.to/2EHKAxO
Microscope camera: https://amzn.to/2Rb5cUq
Capture card recording device: http://amzn.to/2mMTz7t
Soldering iron station: http://amzn.to/2mMYp4v
Microsoldering iron: http://amzn.to/2mMTVuP
Hot air station: https://amzn.to/2K7Mztk
Infrared preheater: http://amzn.to/2mbMlXo
Flux: http://amzn.to/2mXJd1b
Wick: http://amzn.to/2mNr0Xh
Solder: http://amzn.to/2mtyC0a
Gloves: http://amzn.to/2mbHWDI
Fume Extractor (mine is no longer available but this is the new version of the same unit) : http://amzn.to/2mNCmL7
Gear for filming:
small camera: http://amzn.to/2mNw51T
big camera: http://amzn.to/2Ficg9o
Lens on big camera:http://amzn.to/2Cx3fGw
Видео Sandisk usb does not work | here is how to fix it канала HDD Recovery Services
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
memory card just stopped working in the camera | need to recover picturesflash drive is getting hot when connectedDamaged USB 3.0 Flash Drive Data Recoveryhard drive does not spin? simple way to get your data backFix a physically broken USB Thumb DriveUSB drive DESTROYED by customer; Louis attempts data recovery anyway.Sandisk Cruzer will not show up. How to recover data using a donor flash driveHard drives 4TB & 6TB not spinning no power motherboard RepairLexar Professional 1000x SD card data recoveryFLASH DRIVE HEATING PROBLEM SOLVEDQuick way to fix a flash drive to recover data from itST2000DL003 too bad so sadBroken Lexar USB Flash Drive Repair and Data RecoverySandisk USB not recognized - quick and easy fixNew website launch & Broken USB 3.0 Flash drive repairEasy way to recover pictures from broken SD cardflash drive repair and data recoveryflash drive got wet but you need dataHow to Repair a Broken USB Stick or Flash Drive