🏁 TURBO TRANSMISSION BUILD//02M RE-ASSEMBLY🏁. (pt2)

Were doing the most to this transmission!! Got the diff bearings on, input shaft core pressed in, pins drilled out of the diff gear and installed on the Quaife. Bolts are torqued and ready to go!!!
If your building one of these for a high power car you need all of this done!! They're known to strip gears and break shift forks when you beat on it. We made the core for the input shaft, which you can buy. Its just a 20mm shaft. Depending on what size your input shaft ID is you may need to ''turn down'' your core you're pressing in. Its easy to do and id recommend. You also need new diff bearings, steel shift forks, LSD diff, gearbox support...exc its in the vid🤙

A lot of these pictures on older forums online are not working and its hard to find clear info on these cars, so if you know anything were missing or not doing right, questions, anything!! Please post so we can all benefit!!!

All of this stuff was bought off of
https://www.darksidedevelopments.co.uk

Input Shaft Core info
https://www.bar-tek-tuning.com/vollwelle-02m-getriebe-billetshaft

Im driving my VW Van to ALL 50 States and documenting it on my other YouTube
https://www.youtube.com/channel/UC79OzrlQ56DCYuCPcSAXSXA

Insta
https://www.instagram.com/dust.in_a.bus/
https://www.instagram.com/dustibus/
Thank for watch 🏁

Видео 🏁 TURBO TRANSMISSION BUILD//02M RE-ASSEMBLY🏁. (pt2) канала PostPros