Building a 3D Printed Full Sized T-800 Terminator Endoskeleton - Episode 1
Welcome to Hobby World - A place of imagination and creativity
In this video I’m 3D printing and building my very own T-800 terminator endoskeleton in full scale. This is properly the largest 3d printing project I have ever done so I’m really excited about how it’s going to turn out.
Due to the massive size of the project I have decided to make it as several episodes. In this episode I will focus on 3d printing and assembling the model.
As I have never done a project of this size there is a lot of stuff I need to figure out as I work with the build. This is also my first real project video here on YouTube so I hope you all like it. And please don’t judge me too hard for all of the beginner’s mistakes :) I have learned a lot making this video, and I'm sure that the next one will be even better.
Like & Subscribe if you enjoyed it, and please post a comment if you have any feedback or questions.
Thanks for watching
TOOLS & MATERIALS
3 X Ender 3 Pro (0.4mm Nozzle)
1 X CR10S-Pro (0.6mm Nozzle)
Soldering Iron, Metal Saw, Clipper, Hobby Knife
PLA (Terminator Gray, 3DE Premium 1.75mm) 12,5 Kg
Super Glue (150g)
Loctite Power Epoxy Glue (100g)
A bit of wire and a couple of plastic tubes
8 x 5mm round magnets for attaching the head
MISC
Protection: 3M Protective Mask, Sandpaper, Protective Gloves
3D Model of the terminator: https://www.thingiverse.com/thing:2471057
By: Kerag
MUSIC, VIDEO & IMAGE ATTRIBUTION
https://www.dl-sounds.com
https://filmstro.com
https://www.freepik.com/photos/background Background photo created by wirestock
SOCIAL & CONTACT INFORMATION
Facebook: https://www.facebook.com/kim.kristensen.184
Website/Blog: http://www.hobbyworld.one/
Contact: wayrath@hotmail.com
Видео Building a 3D Printed Full Sized T-800 Terminator Endoskeleton - Episode 1 канала Hobby World
In this video I’m 3D printing and building my very own T-800 terminator endoskeleton in full scale. This is properly the largest 3d printing project I have ever done so I’m really excited about how it’s going to turn out.
Due to the massive size of the project I have decided to make it as several episodes. In this episode I will focus on 3d printing and assembling the model.
As I have never done a project of this size there is a lot of stuff I need to figure out as I work with the build. This is also my first real project video here on YouTube so I hope you all like it. And please don’t judge me too hard for all of the beginner’s mistakes :) I have learned a lot making this video, and I'm sure that the next one will be even better.
Like & Subscribe if you enjoyed it, and please post a comment if you have any feedback or questions.
Thanks for watching
TOOLS & MATERIALS
3 X Ender 3 Pro (0.4mm Nozzle)
1 X CR10S-Pro (0.6mm Nozzle)
Soldering Iron, Metal Saw, Clipper, Hobby Knife
PLA (Terminator Gray, 3DE Premium 1.75mm) 12,5 Kg
Super Glue (150g)
Loctite Power Epoxy Glue (100g)
A bit of wire and a couple of plastic tubes
8 x 5mm round magnets for attaching the head
MISC
Protection: 3M Protective Mask, Sandpaper, Protective Gloves
3D Model of the terminator: https://www.thingiverse.com/thing:2471057
By: Kerag
MUSIC, VIDEO & IMAGE ATTRIBUTION
https://www.dl-sounds.com
https://filmstro.com
https://www.freepik.com/photos/background Background photo created by wirestock
SOCIAL & CONTACT INFORMATION
Facebook: https://www.facebook.com/kim.kristensen.184
Website/Blog: http://www.hobbyworld.one/
Contact: wayrath@hotmail.com
Видео Building a 3D Printed Full Sized T-800 Terminator Endoskeleton - Episode 1 канала Hobby World
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Building a 3D printed Full Scale T-800 Terminator Endoskeleton - Episode 2The MANDALORIAN - 3Dprinting & Painting N’stuffT-800 Endoskeleton Life-Size Figure Unboxing3D Printed Biomimetic Mechatronic Hand: Control Glove ExplainedHand building a Terminator T800 skull start to finish - compendium3D printed Terminator Arm that worksA GIANT THANOS - 3D printing & Painting NstuffAgora Models Build the Terminator - Pack 10 - Stages 91-100Lost PLA casting a TERMINATOR skullAdam Savage's Terminator T-800 EndoskeletonTerminator robot animatronic modeloT-800 parte 1Giant Skeleton Minifig - 3D PrintedWhy This 3D-Printed House Will Change The World3D Printing Translucent Green Terminator T-800 SkullBuilding a 3D printed Full Scale T-800 Terminator Endoskeleton - Episode 3Auction interview Hollywood Treasure host Joe Maddalena on Terminator 2 Endoskeleton.EZT T1 Delta Budget DIY 3D Printer Review + Mod + T800 ProjectMaking the T-800 ArmBuild the T-800: Skull Modification Before and After Comparison3D Printed Deadpool Life Size Statue | 1:1 Scale | Deadpool 2 Bust