Make an Autonomous "Follow Me" Cooler - Part 2

In this two part video series, we use an Arduino Uno to build an autonomous "follow me" cooler. The robot cooler connects to a smartphone via Bluetooth and uses GPS to navigate. All the electronics will be contained in the base so that other objects can be carried as well. In the first part, Davis explained how to build the base. In the second part, Aaron works on the electronics.

See how we built it, including our materials and code on Hackster.io: https://www.hackster.io/hackershack/make-an-autonomous-follow-me-cooler-7ca8bc

Find all the 3D printable parts for this project on our Patreon: https://www.patreon.com/posts/follow-me-cooler-37733146

USEFUL LINKS:
Follow Hacker Shack on Instagram:
https://www.instagram.com/hackershackofficial/

Subscribe to Hacker Shack: https://goo.gl/qHjz4j

Visit our website for parts and project updates: https://www.thehackershack.com/

MATERIALS:
1x Arduino Uno: https://goo.gl/Nvv1OT
1x 3s Lipo Battery: https://goo.gl/VRdu7X
1x L298n Motor Driver: https://goo.gl/yI33RH
1x Breadboard: https://goo.gl/EpMcVm
1x PAM-7Q GPS Module: https://goo.gl/MAVYHJ
1x HMC5833l Compass: https://goo.gl/cLduWW
1x HC-05 Bluetooth Module: https://goo.gl/egTaKO

MUSIC:
guggenz - https://soundcloud.com/guggenz

Видео Make an Autonomous "Follow Me" Cooler - Part 2 канала Hacker Shack