Create-A-Bed® Standard Vertical Murphy Bed Construction, Assembly & Installation Video

Create-A-Bed® Standard Vertical Murphy Bed Kit. Build your own Murphy Bed or Wall Bed with this easy to use kit and instructions.

https://www.createabed.com

CHAPTERS
0:00 Introduction
0:02 Create-A-Bed® murphy bed mechanism
1:39 Unpacking the Kit
3:15 Tape Measure Hammer / Clamps
3:22 Buying the Materials
4:10 Identify Components of Bed
4:51 Cutting the Wooden Components
5:03 Construction of Inner Wood Bed Frame
7:12 Edging the Rails
8:12 Drilling the 1 Pivot Holes
9:29 Mounting the Lower Ball Stud Plates
12:44 Mounting the Female Pivot Plates
14:01 Attaching the Side Rails
15:13 Mounting the Head & Foot Rails
17:43 Preparing the Face Panels
19:23 Mounting the Face Panels to the Bed Frame
21:49 Making and Mounting the Legs
25:44 Mounting the Bed Stops
26:28 Mounting the Upper Ball Stud Plate
27:49 Mounting the Male Pivot Plate
29:34 Preparing the Headboard
29:49 Assembling the Header
33:28 Sanding and Finishing the Bed
34:14 Attach the Mattress Supports and Straps
35:25 Assembly and Installation
36:53 Tape Measure Philips-Hd Screwdriver
36:57 Flat-Hd Screwdriver Clamps
41:32 Check Hardware Mounting Position
42:14 DO NOT attempt to operate bed until it is SECURELY anchored to wall
42:37 Anchoring to WOOD STUD Construction
42:40 Media Offline rev wood screws
43:36 Media Offline rev tapcon screws
43:50 Twin Size - 3 Full Size - 3 Queen Size - 4
44:33 Anchoring to METAL STUD Construction
44:37 Media Offline rev wall anchors
47:48 DISASSEMBLY
50:29 Frequently Asked Questions
50:34 What kind of mattress do I use with my bed?
50:52 I can't compress the piston... is it "frozen up"?
51:49 I pushed my face panel back into the bed cabinet
52:31 Why does the face panel of my bed sag out of the cabinet?

Видео Create-A-Bed® Standard Vertical Murphy Bed Construction, Assembly & Installation Video канала Create-A-Bed