GD&T: Composite Profile With "Individually"
I made a mistake in using half of the .02 profile in the minimum wall calculation to the datum. The full profile should be used, not the .01 like I said in the video. Also, an all around symbol should be on the leader.
I discuss composite profile applied to a pattern, with an individual form and size requirement.
I show how the minimum gaps are calculated depending on what you are looking for.
This is based on a question from the ASME GDTP Senior Certification exam.
Видео GD&T: Composite Profile With "Individually" канала R. Dean Odell
I discuss composite profile applied to a pattern, with an individual form and size requirement.
I show how the minimum gaps are calculated depending on what you are looking for.
This is based on a question from the ASME GDTP Senior Certification exam.
Видео GD&T: Composite Profile With "Individually" канала R. Dean Odell
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![CAD with #Solidworks: Sketching Feature of Size Datum (Sketch Origin), GD&T with Design Intent](https://i.ytimg.com/vi/Nb-1rQhl8PE/default.jpg)
![Engineering Control of Hazards, Chapter 11, Industrial Relations Safety and Health #HVCC](https://i.ytimg.com/vi/096Y0ZMexWo/default.jpg)
![GD&T ASME Y14.5: “Rule #2” Explained](https://i.ytimg.com/vi/6ENuvFXpo-o/default.jpg)
![GD&T Limits of Size vs Flatness, ASME Y14.5 #GDT #ASME](https://i.ytimg.com/vi/X3744_KmX5I/default.jpg)
![GD&T Converting Bolt Holt Circles to Position](https://i.ytimg.com/vi/IiUPpxxZuvI/default.jpg)
![Print Reading: Applying Dimensions](https://i.ytimg.com/vi/12LX06swOos/default.jpg)
![GD&T Livestream #14](https://i.ytimg.com/vi/RacCAGca9jQ/default.jpg)
![Processes Used to Form Composite Materials, Chapter 18, MFTS 211](https://i.ytimg.com/vi/2o9xvM2D7yA/default.jpg)
![Print Reading: Section Views](https://i.ytimg.com/vi/UmdQ6oiXj04/default.jpg)
![Auxiliary Views, Print Reading](https://i.ytimg.com/vi/THdF_P32Kj4/default.jpg)
![GD&T: Common Datum Feature “A-B”](https://i.ytimg.com/vi/e4HKDCiOndc/default.jpg)
![Print Reading: Auxiliary Views](https://i.ytimg.com/vi/MYDEDx-_Euo/default.jpg)
![Print Reading: Applying Orthographic Projection](https://i.ytimg.com/vi/rtR_2kwuHJQ/default.jpg)
![CAD with Solidworks: Sketching Conical Feature with Driving Dimension (Included Angle)](https://i.ytimg.com/vi/eOrQ_ESGJSI/default.jpg)
![FLATNESS TOLS](https://i.ytimg.com/vi/bgF05FT_92A/default.jpg)
![Capturing Screenshots with Snipping Tool, Windows 10](https://i.ytimg.com/vi/y5wriHlSAE4/default.jpg)
![Loft Feature, Solidworks](https://i.ytimg.com/vi/ZtWwJ58anHQ/default.jpg)
![Complaining about ASME Y14.5 Changes 1994-2009](https://i.ytimg.com/vi/ZXYzvfDoFgA/default.jpg)
![CAD with Solidworks: Assembly Techniques, SmartMates](https://i.ytimg.com/vi/NEhz-zXTb3Q/default.jpg)
![Fanuc ER-4iA, Turning On and Jogging In Joint](https://i.ytimg.com/vi/QA_5U0uOpOc/default.jpg)
![GD&T Live #16 Triangle Symbols, Dynamic Profile and Translation](https://i.ytimg.com/vi/6xrGPkqZOVM/default.jpg)