Make 5 in 1 Robot

5 in 1 Arduino Robot | Follow Me | Line Following | Sumo | Drawing | Obstacle Avoiding
$0 For New members first order & Low Price for PCB Stencil at https://www.pcbway.com/
This robot control board contains an ATmega328P microcontroller and an L293D motor driver. Of course, it is no different from an Arduino Uno board but it is more useful because it does not need another shield to drive the motor! It is free from jumper clutter and can be easily programmed with the CH340G. While driving two DC motors, you can also control different sensors by using I / O pins with this board. In this project, we used an HC-SR04 ultrasonic distance sensor and an IR infrared sensor. In addition, one servo motor was used. You can also get an idea of how to make your own arduino uno board with this video.

Product Detail
Board type : Single PCB
Size : 53.3mm x 66mm
Layers : 2 Layers
Total: 5 Pcs / US $5
Get the PCB Gerber & Schematic: https://bit.ly/2WycZxT

In this project, DIP type components were used for easy soldering.

Required Components:
ATmega328P with Bootloader:
https://bit.ly/2U9iwJw
https://amzn.to/39sAs9g
L293D Motor Driver IC:
https://bit.ly/33BV2ju
https://amzn.to/2ZqRob1
Type B USB Socket:
https://bit.ly/2WBSQqw
https://amzn.to/3drUYIl
DIP Socket 28/16 Pins:
https://bit.ly/2UahQDK
https://amzn.to/3dqOPMF
12/16 MHz Crystal:
https://bit.ly/33FNTyL
https://amzn.to/31yAYhB
L7805 TO-220:
http://bit.ly/2N5WnYG
https://amzn.to/3rFGY2A
100uF Capacitor:
https://bit.ly/2U98JTU
https://amzn.to/3sFBDcX
LED
http://bit.ly/37OajhS
https://amzn.to/3qxSs8O
Resistor 10K/ 1K
https://bit.ly/2WFsNPl
https://amzn.to/3bj2HY9
470nF Capacitor
https://bit.ly/2UwQ2bw
https://amzn.to/3fBj9a4
Power Jack Socket
http://bit.ly/2QAzFdp
https://amzn.to/31G7Mp3
2 Pin Terminal Block
http://bit.ly/2lEgy58
https://amzn.to/31ETYei
Male Pin Header
https://bit.ly/3ab5h0w
https://amzn.to/3dmwTT9
10nF / 22pF Ceramic
https://bit.ly/2WCuQ6Y
https://amzn.to/31DVAVF
6V Mini Metal Gear Motor :
https://bit.ly/2Qyt0QD
https://amzn.to/3sKH2jh
7.4V 2S Lipo Battery
https://bit.ly/2xdLUp3
https://amzn.to/39vbKFe
9V 800mAh Battery:
http://bit.ly/32oPu9X
https://amzn.to/2O4h5vK
9V Battery Connector:
https://bit.ly/2Ua9b4k
https://amzn.to/2QHL3qi
Ultrasonic Module HC-SR04 :
ttps://bit.ly/2y2apWJ
https://amzn.to/3s4SbdT
IR Infrared Sensor:
https://bit.ly/2WCQgAS
https://amzn.to/31xMABy

Get the Source Code: https://bit.ly/2xfpIee
Get the 3D Files: https://bit.ly/2Uu7z4p

You can program a robot with 5 different scenarios with this control card. The following scenarios are included in this project:

SUMO mode: It is a sport in which two robots attempt to push each other out of a circle (in a similar fashion to the sport of sumo).

Follow Me Mode: It can sense the presence of object to be followed using HC-SR04 sensor.

Tracking Mode: Line follower Robot is a vehicle which follows a line, either a black line or white line.

Avoiding Mode: Obstacle Avoiding Robot is an intelligent device which can automatically sense the obstacle in front of it and avoid them by turning itself in another direction.

Drawing Mode: It contains servo motor and a pen. It can draw its own movement tracks on the surface.

Видео Make 5 in 1 Robot канала MERT Arduino & Tech