Pincers Restoration [Very Rusty Restoration]
I used many different techniques to restore an old pincers. In this restoration video I will file, use rust remover, drill, cut threads, cold bluing, use powder coating and use thread lock. I found this old tool in my barn and thought: "That would be great to restore this very rusty handtool" - Now the time has come!
▬ What did I do ?! ▬▬▬▬▬▬▬▬
The pincers were so rusted that they couldn't be opened normally, so I used rust remover and a hammer, which unfortunately didn't work. The continued use of rust remover didn't help either, so I decided to saw off the bolt. Finally, with a pin punch, I completed the disassembly. I processed the contact surfaces, cutting edge and unevenness with the file. After masking the surfaces, I heated the components of the old rusted pincers to 200 ° C / 392 ° F and dusted them with powder paint. That color melted on the hot metal. I drilled a hole in the bolt and cut a thread into it and cold bluing. I made a small screw on a lathe and finished it in the restoration video. After applying grease, I was able to assemble everything and glue in the self-made screw with screw lock.
▬ Good to know ▬▬▬▬▬▬▬▬
I used the following tools: hammer, rust remover, screwdriver, wire brush, file, vise, pliers, sandpaper, tape, key file, drill, thread cutter, cordless screwdriver, cutting oil, quick bluing, brush, oven, powder coating, knife, grease, thread lock
It took me about 9 hours to restore, without the paint drying time.
▬ Chapter ▬▬▬▬▬▬▬▬
0:00 Look at rusty pincers
0:44 Disassemble
3:38 File bumps and surfaces
4:54 Masking for painting
5:11 Apply powder coating to pincers
6:30 Remove tape and excess paint
7:07 File and grind bolt
7:43 Cut thread in bolt
8:23 Finish the bolt
8:41 Bring quick bluing on bolt
9:10 Apply grease
9:26 Assembling the pliers
10:05 Before - After
10:35 Function test
▬ Did you like it? ▬▬▬▬▬▬▬▬
Did you like the video? Then like, subscribe and please share it!
Many Thanks!
Видео Pincers Restoration [Very Rusty Restoration] канала Forgotten Shine Restoration
▬ What did I do ?! ▬▬▬▬▬▬▬▬
The pincers were so rusted that they couldn't be opened normally, so I used rust remover and a hammer, which unfortunately didn't work. The continued use of rust remover didn't help either, so I decided to saw off the bolt. Finally, with a pin punch, I completed the disassembly. I processed the contact surfaces, cutting edge and unevenness with the file. After masking the surfaces, I heated the components of the old rusted pincers to 200 ° C / 392 ° F and dusted them with powder paint. That color melted on the hot metal. I drilled a hole in the bolt and cut a thread into it and cold bluing. I made a small screw on a lathe and finished it in the restoration video. After applying grease, I was able to assemble everything and glue in the self-made screw with screw lock.
▬ Good to know ▬▬▬▬▬▬▬▬
I used the following tools: hammer, rust remover, screwdriver, wire brush, file, vise, pliers, sandpaper, tape, key file, drill, thread cutter, cordless screwdriver, cutting oil, quick bluing, brush, oven, powder coating, knife, grease, thread lock
It took me about 9 hours to restore, without the paint drying time.
▬ Chapter ▬▬▬▬▬▬▬▬
0:00 Look at rusty pincers
0:44 Disassemble
3:38 File bumps and surfaces
4:54 Masking for painting
5:11 Apply powder coating to pincers
6:30 Remove tape and excess paint
7:07 File and grind bolt
7:43 Cut thread in bolt
8:23 Finish the bolt
8:41 Bring quick bluing on bolt
9:10 Apply grease
9:26 Assembling the pliers
10:05 Before - After
10:35 Function test
▬ Did you like it? ▬▬▬▬▬▬▬▬
Did you like the video? Then like, subscribe and please share it!
Many Thanks!
Видео Pincers Restoration [Very Rusty Restoration] канала Forgotten Shine Restoration
Показать
Комментарии отсутствуют
Информация о видео
6 февраля 2021 г. 18:55:11
00:11:02
Другие видео канала
Antique Italian Coffee Grinder - RestorationTurn A 2€ Rusty Knife Into High-End Japanese Chef's KnifeRESTORATION The Most Destroyed & Rusty Angle Grinder you never seen before - Kinda IMPOSSIBLE RepairRestoration Rusty Survival KnifeAntique Rusty Saw Restoration | With Epoxy Handle RepairAntique Rusty Hand Plane - RestorationВосстановление старого мотоцикла из 1960-х | Old Soviet motorcycle full RestorationVery Rusty Stuck Vise Restoration | Mister PatinaBroken Rusty Adze Restoration - Grandpa's ToolboxRestoring a Piece of History - Random HandsMost Destroyed Hydraulic Jack EVER ! Amazing RESTORATIONRestoration Old skilsaw | Restoring Worm Drive Heavy Duty Corded Circular SawINCREDIBLY killed heavy hammer. Restore from the DEAD.Rusted and Fully Jammed Plier Restoration - With Surprising HandleEXTREMELY Rare Whisky Hip Flask Restoration from World War 2 Battle of BulgeHand Cranked Grinder Restoration - Antique Bench GrinderAntique Ox-Tongue Iron - RestorationButchers HUGE AXE Restoration - TRIPAS 2Restoration Abandoned Rusty Gasoline ChainSawBroken Deadlocked Vise - Perfect Restoration (I did it again)