How To Clean Car Battery Terminals--THE EASY WAY!!!
Originally recorded June 5, 2014.
This video explains how to clean your car battery terminals. There are a few tools required: A wrench (10mm for this car), and some sort of wire brush or battery terminal cleaning tool.
Simply remove the NEGATIVE battery terminal first, then the positive, and clean both the battery posts and the actual terminals with your wire brush until they are bright and shiny.
Then, reconnect your positive cable first, and negative cable last.
Fairly simple, and should take a novice only about 10 minutes.
Important note: On most modern cars, when the battery has been disconnected, the computer will lose the engine run characteristics. That means that once cleaned and you start the engine back up, it may run funny for a while--too fast or too slow, it make shake, even stall on you. This is especially true if it is an older car (reason being is the computer is expecting the intake to be perfectly clean, but on a car with many miles on it, it isn't clean, so the computer has to compensate, and it takes time for that to happen). Usually after 15 minutes or so the car should be running normally once again.
Видео How To Clean Car Battery Terminals--THE EASY WAY!!! канала jaykay18
This video explains how to clean your car battery terminals. There are a few tools required: A wrench (10mm for this car), and some sort of wire brush or battery terminal cleaning tool.
Simply remove the NEGATIVE battery terminal first, then the positive, and clean both the battery posts and the actual terminals with your wire brush until they are bright and shiny.
Then, reconnect your positive cable first, and negative cable last.
Fairly simple, and should take a novice only about 10 minutes.
Important note: On most modern cars, when the battery has been disconnected, the computer will lose the engine run characteristics. That means that once cleaned and you start the engine back up, it may run funny for a while--too fast or too slow, it make shake, even stall on you. This is especially true if it is an older car (reason being is the computer is expecting the intake to be perfectly clean, but on a car with many miles on it, it isn't clean, so the computer has to compensate, and it takes time for that to happen). Usually after 15 minutes or so the car should be running normally once again.
Видео How To Clean Car Battery Terminals--THE EASY WAY!!! канала jaykay18
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How to clean car battery terminals in 30 seconds.Doing This Will Make Your Car Battery Last Twice as LongHow To Properly Clean & Protect Your Battery Terminals From CorrosionCorrosion on Your Car / Truck Battery? Cleaning Tips! It’s Important!Battery Care and Maintenance Tips -EricTheCarGuyCar Maintenance : How to Clean a Car BatteryHow To Clean Battery Terminals Corrosion (and How to Replace Battery Terminals if Needed)Cleaning Battery Terminal Corrosion / Nissan AltimaCar Won't Start: Alternator or Battery? The easy way to knowHow to Test and Replace a Bad Car Battery (COMPLETE Ultimate Guide)Cleaning Car Battery Corrosion and Applying PreventativeHow to Properly Jump Start a Car3 Easy Tricks To Start a Dead Car - Without Jumper CablesEASILY Clean Battery Leak Damage(Corrosion) In ElectronicsHard Start? Not Starting? Clicks? Find Out Why | Dead Battery Alternator Starter TestHow to Replace Battery TerminalsHow to properly clean & protect your battery terminals from corrosion!HOW TO Safely Change the Battery In Your Toyota TacomaHow to Test a Car Battery with a Multimeter