Arduino Spot Welder (Malectrics) Assembly and quick test (part1)

Assembling the Malectrics Arduino Spot Welder kit and quick test

IMPORTANT WARNING FOR PROPER FUSE INSTALL
Please note that 2 of the 4 washers for the 300A fuse installation (around 35.30) should be on the NUT side and not as shown on top of the fuse. If you tighten the nut too much the nut will deform the fuse contact and will fall through which can lead to a bad contact and potential fire hazard. The instructions should clarify this. Here is the correct washer install photo:
https://www.youtube.com/channel/UCiPCXz7updADVNtmvQoa3OA/community?lb=Ugkxy_r0SVgqQn622V8QbJ44Amrj8f8YAMsZ

If you like and appreciate my content, feel free to like and subscribe and why not offer me a beer @ my paypal: icecool.daiceman@gmail.com - cheers!

https://malectrics.eu/
Assembly instructions:
https://malectrics.eu/v4-lipo-battery-bundle-assembly-instructions/

Видео Arduino Spot Welder (Malectrics) Assembly and quick test (part1) канала Luca