Poor Man's Kayak Modifications

Cheap Menards kayak fishing modifications.
This video was put together as a inexpensive way to get your sit in kayak water ready for fishing. I show you how to install heavy duty handles, an inexpensive anchor trolley system, flush mount rod holders and rod leashes.
Keep in mind this is a sit in kayak, the open cockpit will allow water to get in. That being said, I do not use silicone on my drilled holes. What I do is use a rubber washer that fits the stainless steel screw nice and snug and then a stainless washer slightly over sized to the rubber washer to create a water tight seal. You will get more water through the cockpit opening then any hole on this kayak if any at all. These are inexpensive modifications to get on the water. At any time you can take these ideas and upgrade to better quality material and maybe even build on these ideas and make them better, it’s your yak. Keep in mind that any cuts and or holes you make a very hard to repair so measure tice cut once. Some of these mods are necessary and some may not be for your style of fishing. Be sure to check out my playlist of other kayak mods that may be helpful.
https://www.youtube.com/playlist?list=PLfVZfM-DJU_q14F2e4JGl6QcNiquYWFCf

www.austinkayak.com
This was the place that had the cheapest deck eyes.
Deck eyes product ID# 223
Nylon pad eye

www.academy.com
This is where we got the rest of the stuff.
Flush mount rod holders #FMH
handle kit #HAND
Anchor cleat #ACRT
24" coiled paddle leash #CPL24

The stainless hardware and rubber washers for the deck eyes where from Ace hardware.
For the deck eyes you'll need:
screws and lock nuts
rubber washers with a snug fit
oversized stainless washers
quantities for the amount of deck eyes you will be using

For the anchor trolley system you'll need:
Para cord 50ft
2 stainless rings 2 inch but no less the 1 1/2 inch
And electrical tape

Rod leashes you'll need either old phone cord or new:
10ft or more phone cord
Small zip ties 6 for each rod leash
2 carabiners big enough to attach to your fishing rod handles
2 carabiners to attach to the deck eyes on the rod holders
And a few extra carabiners for miscellaneous leashes for other tackle or things you want attach to the yak.

You will need a anchor rope and for a anchor we use a 10lb workout weight, or a stakeout pole.
Grainger sells fiberglass rod stock I got 10ft that I cut to 8ft 3/4 diameter is best.
http://m.grainger.com/mobile/search/fiberglass-rod-stock/fiberglass/raw-materials/ecatalog/N-c18

If you enjoy these videos please like, share and also don’t forget subscribe to this channel so you can get the latest tips, tricks, vlogs and fishing fun. Thank You.

If you like the Fish On! logo and would like to purchase Fish On! merchandise please use this link http://flycrazyflywear.com/

Video tools:
Gopro Hero4 Silver
Gopro Hero4 Session https://gopro.com/
Editing software:
CyberLink PowerDirector 11 http://www.cyberlink.com/

Bass Pro Shops http://www.basspro.com/

Boat: 2013 Crestliner 1650 Fish Hawk with a Mercury 60hp 4cycle outboard
Crestliner Boats https://www.crestliner.com/
Kayak: 2012 Viper 10.4
Viper http://viper-kayaks.com/

www.academy.com
This is where we got the rest of the stuff.
Flush mount rod holders #FMH
handle kit #HAND
Anchor cleat #ACRT
24" coiled paddle leash #CPL24

The stainless hardware and rubber washers for the deck eyes where from Ace hardware.
For the deck eyes you'll need:
screws and lock nuts
rubber washers with a snug fit
oversized stainless washers
quantities for the amount of deck eyes you will be using

For the anchor trolley system you'll need:
Para cord 50ft
2 stainless rings 2 inch but no less the 1 1/2 inch
And electrical tape

Rod leashes you'll need either old phone cord or new:
10ft or more phone cord
Small zip ties 6 for each rod leash
2 carabiners big enough to attach to your fishing rod handles
2 carabiners to attach to the deck eyes on the rod holders
And a few extra carabiners for miscellaneous leashes for other tackle or things you want attach to the yak.

You will need a anchor rope and for a anchor we use a 10lb workout weight, or a stakeout pole.
Grainger sells fiberglass rod stock I got 10ft that I cut to 8ft 3/4 diameter is best.
http://m.grainger.com/mobile/search/fiberglass-rod-stock/fiberglass/raw-materials/ecatalog/N-c18

Follow me at:
Bass Hole Facebook: https://www.facebook.com/profile.php?id=100006187695757
Bass Hole FB Page: https://www.facebook.com/bassholefishon/
Fish On! Facebook Groups:https://www.facebook.com/groups/fishonil/
BassHoleFishOn! Instagram: https://instagram.com/bassholefishon/
Twitter BassHoleFishOn: https://twitter.com/BassHoleFishOn
Bass Hole G+: https://plus.google.com/+BassHole-FishOn/
Fish On! Google Community: https://plus.google.com/communities/117179822276181696327

Видео Poor Man's Kayak Modifications канала Fishing POV