Wiper motor servo test #3
Need a strong servo for large project. So lets build one.
Components:
Simple servo (hobbyking)
Windscreen wiper motor (non oem VW skruvat.se)
DC motor driver VNH3SP30 (electrokit)
Motor driver:
Pin 6-7-8-1(PWM-ENB-ENA-VIN) connected to eachother.
Pin 4 and 5(INA, INB) to motor output cables from modified servo.
Battery and motor to the large connectors.
Servo:
Cut cables and remove motor.
Solder long cables to motorcables and route them out from the servo.
Видео Wiper motor servo test #3 канала Buffson
Components:
Simple servo (hobbyking)
Windscreen wiper motor (non oem VW skruvat.se)
DC motor driver VNH3SP30 (electrokit)
Motor driver:
Pin 6-7-8-1(PWM-ENB-ENA-VIN) connected to eachother.
Pin 4 and 5(INA, INB) to motor output cables from modified servo.
Battery and motor to the large connectors.
Servo:
Cut cables and remove motor.
Solder long cables to motorcables and route them out from the servo.
Видео Wiper motor servo test #3 канала Buffson
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Autonomous 1:87, first runLynx 535Cobra 480, Tohatsu 25hp 2TLinder 355 Sportsman - Honda BF10MTA-4 Hobbywing Brushless 150A comboServostyrd gasKRIT mini sumo 2013Onödig lådaFirst test run of my Tamiya ScaniaMTA-4 in-Car -- 2S LIPO 150A hobbywing brushless comboKyosho Blizzard DXAktiv kariboPreparing for STHLM Robot Championship 2014Hbx micro buggy on 2sLynx 535SälarAutonomous boat, robotex 15Folkrace, first runs 2012Mini sumo Deathmatch STHLM robot championshipScania RcEngine throttle by RC-servo