Pore Filling Koa with Epoxy (Z-Poxy) Beau Hannam Guitars and Ukuleles

If you enjoy such lutherie videos, please SUBSCRIBE.

I recommend applying a thin coat at least on the first application to minimize problems associated with surface tensions which cause graters- which all goes away when you scrape it down but its annoying.

Epoxy used in this is Z-Poxy PT-40 (a self leveling finishing epoxy).
I've heard from some luthiers they got shrink back of the Z-poxy pore filler after buffing, then those luthiers tried WEST systems and got no shrink back. Having said that, I've also heard from other luthiers that they got shrink back after using WEST system......

So, aim for minimal heat when buffing with any pore fill.

Also, I pretty sure the pin holes above the pores were caused by leaving the epoxy too thick on the first coat. It's caused by opposing surface tensions of the wood and epoxy on the first coat.
Luthier of luxury heirloom quality guitars and ukuleles.
https://www.beauhannamguitars.com

Видео Pore Filling Koa with Epoxy (Z-Poxy) Beau Hannam Guitars and Ukuleles канала Beau Hannam Guitars and Ukuleles