How to restore to Stock Rom (Android Jelly Beans) on Samsung Galaxy Tab 2 (GT-P5110)

Guide to restore your device to stock rom.
This method work across most of the Android Devices. I am going to use my Samsung Galaxy Tab 2: GT-P5110 to illustrate this.

#Firmware links
GT-P5110
http://samsung-updates.com/device/?id=GT-P5110

GT-P5113
http://samsung-updates.com/device/?id=GT-P5113

GT-P5100
http://samsung-updates.com/device/?id=GT-P5100

#Stock Firmware for ANY Android device
http://samsung-updates.com/latest-firmware/

#Odin v3.0.9
http://odindownload.com/

#Samsung USB Drivers
http://developer.samsung.com/technical-doc/view.do?v=T000000117

Steps in nut shell
1. Completely backup your device and ensure at least 85% battery charge.
2. Download the corresponding file from the Samsung Updates website.
3. Extract the zip file to get .tar.md5 file, and along with other files if present.
4. Download Odin, and Install necessary Samsung USB drivers.
5. Ensure that USB Debugging Mode is turn on.
6. Turn off your device, and boot into Download mode by pressing and holding Volume Down and Power Buttons together.
7. Run Odin, and connect your device to the computer through USB cable and blue box will appear if successfully connected, if not restart your computer and retry Step 7.
8. In Odin, click AP and select the .tar.md5 extracted file, and only ensure that ‘Auto Reboot’ and ‘F.Reset Time’ is checked, and NOTHING else.
9. Grab a cup of tea and click START button when you are ready.
10. After couple of minutes, the device will restart and Odin should display PASS message in the green box.
11. If you are stuck in the boot logo, go to Recovery Mode, and perform ‘Factory/Data reset’.
12. That’s it, after your device rebooted, you shall have Jelly experience :)

Follow me on instagram @sithusky

Music credited: http://www.bensound.com

Видео How to restore to Stock Rom (Android Jelly Beans) on Samsung Galaxy Tab 2 (GT-P5110) канала C2Tech