How to make a Hologram
A very detailed 12 step DIY guide on how to make a Hologram. We start by cutting the glass, then making the film, then exposing it to Laser light and finally developing and sealing the finished Hologram. This is DCG (dichromated gelatin) Holography. https://holocreators.com/
These are the 12 Steps you need to do to create your own real hologram on glass with DCG (dichromated gelatin):
0:00 Introduction
0:13 Step 1 – Checking the glass – To get the perfect Hologram you have to check the orientation of the “parallel-lines-pattern” inside the glass.
1:53 Step 2 – Cutting the glass – With a good cutting technique you will waste less glass in your hologram production.
4:12 Step 3 – Cleaning the glass – An Overview of the best chemicals for glass cleaning and how to detect the correct side for coating the glass.
6:26 Step 4 – Preparing the gelatin – Some proven DCG Hologram recipes and how they are adjusted for different temperatures and laser wavelengths.
9:49 Step 5 – Sensitizing the gelatin – How to add the Ammonium Dichromate to the gelatin mix and properly filter it.
13:08 Step 6 – Coating the glass – Working in a controlled coating environment makes better, cleaner holograms and also keeps you safe.
16:07 Step 7 – Building the exposure setup – Instructions on how to build a holographic recording setup.
18:03 Step 8 – Exposure – Expose your coated plates correctly to get the best holograms.
22:37 Step 9 – Developing – Keeping the many variables under control makes this the most crucial and difficult step in the hologram production.
30:38 Step 10 – Scraping – By removing some of the gelatin the Hologram will be properly framed.
33:49 Step 11 – Sealing – Using Epoxy Resin and gluing a cover plate on the hologram will protect it from moisture and preserve it for many years.
39:44 Step 12 – Grinding – Taking off the sharp edges from the glass will make the Hologram safer and more presentable.
ABOUT HOLOCREATORS
Holocreators is a 3D scanning and reverse engineering company. We offer 3D Scan and Reverse Engineering Services:
https://holocreators.com/
Email: info@holocreators.com
Want more videos? Please subscribe ► https://www.youtube.com/channel/UCCqASJ0TtkgTtXN5on_POYw?sub_confirmation=1
CONNECT WITH US
Blog: https://holocreators.com/blog/
Youtube: https://www.youtube.com/holocreators
Facebook: https://www.facebook.com/holocreators
Twitter: https://twitter.com/Holocreators
Reddit: https://www.reddit.com/user/Holocreators
LinkedIn: https://www.linkedin.com/company/holocreators
Instagram: https://www.instagram.com/holocreators/
HASHTAGS
#Holography
#Hologram
#DIY
#Laser
#Science
#DCGholography
#Lightartist
#3D
Видео How to make a Hologram канала Holocreators GmbH
These are the 12 Steps you need to do to create your own real hologram on glass with DCG (dichromated gelatin):
0:00 Introduction
0:13 Step 1 – Checking the glass – To get the perfect Hologram you have to check the orientation of the “parallel-lines-pattern” inside the glass.
1:53 Step 2 – Cutting the glass – With a good cutting technique you will waste less glass in your hologram production.
4:12 Step 3 – Cleaning the glass – An Overview of the best chemicals for glass cleaning and how to detect the correct side for coating the glass.
6:26 Step 4 – Preparing the gelatin – Some proven DCG Hologram recipes and how they are adjusted for different temperatures and laser wavelengths.
9:49 Step 5 – Sensitizing the gelatin – How to add the Ammonium Dichromate to the gelatin mix and properly filter it.
13:08 Step 6 – Coating the glass – Working in a controlled coating environment makes better, cleaner holograms and also keeps you safe.
16:07 Step 7 – Building the exposure setup – Instructions on how to build a holographic recording setup.
18:03 Step 8 – Exposure – Expose your coated plates correctly to get the best holograms.
22:37 Step 9 – Developing – Keeping the many variables under control makes this the most crucial and difficult step in the hologram production.
30:38 Step 10 – Scraping – By removing some of the gelatin the Hologram will be properly framed.
33:49 Step 11 – Sealing – Using Epoxy Resin and gluing a cover plate on the hologram will protect it from moisture and preserve it for many years.
39:44 Step 12 – Grinding – Taking off the sharp edges from the glass will make the Hologram safer and more presentable.
ABOUT HOLOCREATORS
Holocreators is a 3D scanning and reverse engineering company. We offer 3D Scan and Reverse Engineering Services:
https://holocreators.com/
Email: info@holocreators.com
Want more videos? Please subscribe ► https://www.youtube.com/channel/UCCqASJ0TtkgTtXN5on_POYw?sub_confirmation=1
CONNECT WITH US
Blog: https://holocreators.com/blog/
Youtube: https://www.youtube.com/holocreators
Facebook: https://www.facebook.com/holocreators
Twitter: https://twitter.com/Holocreators
Reddit: https://www.reddit.com/user/Holocreators
LinkedIn: https://www.linkedin.com/company/holocreators
Instagram: https://www.instagram.com/holocreators/
HASHTAGS
#Holography
#Hologram
#DIY
#Laser
#Science
#DCGholography
#Lightartist
#3D
Видео How to make a Hologram канала Holocreators GmbH
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Making Real Holograms!Build a 3D Hologram ProjectorDIY Transparent ScreenIntroduction to Holography - Types of HologramsI could hardly believe my eyes! - Looking Glass Holographic MonitorThe Making of The Dark ritual HologramHolographic FlexLEDYou can feel and hear these hologramsPhysics of Holography lecture by Pete RoginaDIY Rocket Engines - Easy and Cheap!✅🔟 Most Advanced HologramS that are INSANE!How 3D holograms workHologram Making Tutorial Full process recording with LED and processingCan you make quantum entangled photons using garbage and fertilizer? Probably.Details in the process of making "blacker than vantablack" coatings (part 1?)I bought a HOLOGRAM DISPLAY?? - This is INSANE!!Hologram Video 3DTypewriter hologram DCGHolograms on chocolateDIY Resin That BENDS Light Into Rainbows