- Популярные видео
- Авто
- Видео-блоги
- ДТП, аварии
- Для маленьких
- Еда, напитки
- Животные
- Закон и право
- Знаменитости
- Игры
- Искусство
- Комедии
- Красота, мода
- Кулинария, рецепты
- Люди
- Мото
- Музыка
- Мультфильмы
- Наука, технологии
- Новости
- Образование
- Политика
- Праздники
- Приколы
- Природа
- Происшествия
- Путешествия
- Развлечения
- Ржач
- Семья
- Сериалы
- Спорт
- Стиль жизни
- ТВ передачи
- Танцы
- Технологии
- Товары
- Ужасы
- Фильмы
- Шоу-бизнес
- Юмор
laminar flow and heat transfer through3D L-shaped using ANSYS fluent.
In this video, we will study the three-dimensional heat transfer in the form of the L using the ANSES. The fluid is air and the flow is laminar. We will use a mesh of a multi-zone type to obtain accurate results.
Видео laminar flow and heat transfer through3D L-shaped using ANSYS fluent. канала SY_ technology
Видео laminar flow and heat transfer through3D L-shaped using ANSYS fluent. канала SY_ technology
Комментарии отсутствуют
Информация о видео
14 июля 2022 г. 17:58:24
00:18:17
Другие видео канала
Shell and tube heat exchanger with one pass (geometry and mesh)
Heat transfer and fluid flow through circular fins inside rectangular duct using ANSYS FLUENT, CFD
ANSYS: pressure and velocity distribution through a rectangular cavity has a concentrated cylinder.
ANSYS FLENT, 3D Tutorial, heat transfer and temperature distribution through hollow cylinder.
ANSYS MESHING TUTORIAL for beginners, meshing the divergence channel using edge sizing part (2)
Shell and tube Heat exchanger with dimple inner single tube using ANSYS FLUENT
ANSYS TUTORIAL: Create 2D and 3D body, using pattern and Boolean operation for beginners
Design of cabient with different blocks, network and heat sink
ANSYS FLUENT Tutorial 3 for beginners, using a revolve and sweep for the body.
ANSYS FLUENT tutorial, free convection heat transfer through a horizontal plate
ANSYS FLUENT Tutorial third lesson setup for divergence channel for beginners.
heat exchanger of double tube, using ANSYS FLUENT , geometry, meshing and draw the results
Thermal Analysis of Heat Sink Contains Three Micro Channels using ANSYS FLUID.
Ansys Fluent tutorial for beginners. Steady, laminar heat transfer through L shape geometry.
Steady of heat transfer through heat exchanger using ANSYS FLUENT
Ansys Tutorial: 3D heat transfer through square micro channel locates inside a circle heat sink
ANSYS ICEM CFD tutorial on a 3D rectangular domain.
the cabinet's walls proprties control
ANSYS TUTORIAL: Double pipe heat exchanger design
2D simulation using Ansys fluent
