Redmi Note 14 Pro 5G Dead Solution | All Input Output Voltages & Power Sequence

#RedmiNote14Pro5G #DeadSolution #MobileRepairing #MotherboardRepair #VoltageCheck #XiaomiRepair #ChargingICIs your Redmi Note 14 Pro 5G completely dead or not turning on? This professional hardware repair guide covers all motherboard input and output voltages (VBUS, VPH_PWR, PMIC) to fix no-power issues.In this video, we perform a deep-dive diagnosis of the Redmi Note 14 Pro 5G power sequence. If your device is stuck on a black screen or shows 0.0mA on the DC Power Supply, follow these exact test points to find the short circuit or faulty IC using a multimeter.🛠 Technical Troubleshooting Steps:Input Stage: Check VBUS (5.0V) at the charging connector and OVP IC.Battery Rail: Measure VBAT (3.7V - 4.4V) at the battery connector.Main Power: Test VPH_PWR (3.7V) after the DC-to-DC Charging IC.PMIC Outputs (LDO & Buck):VDD_CPU: 0.8V - 1.2V (Booting rail)VDD_SOC: 0.9VLDO 1.8V: Always ON rail for Power Key sensing.Clock & Reset: Verify 19.2MHz Crystal Oscillator and Power Key high-to-low trigger.📌 Key Voltages for Diagnosis:Test PointExpected VoltageFault if MissingVBUS5.0VCharging Port / Flex CableVPH_PWR3.8VCharging IC / Short CircuitVREG_L5_1P81.8VMain PMIC FailureVDD_CORE0.9VCPU Power Supply / CPU Reball

Redmi Note 14 Pro 5G dead solution, Redmi Note 14 Pro 5G not turning on, Redmi Note 14 Pro 5G power ic voltage, Redmi Note 14 Pro 5G charging ways, motherboard short circuit find, mobile repairing course, power sequence chart

Видео Redmi Note 14 Pro 5G Dead Solution | All Input Output Voltages & Power Sequence канала Mobile Solutions